Food Rheology Tester/ Vertical Model Motorized Test Stand/ Compact Multi Test Stand/
Automatic Screw-cap Tester/ Measurement Unit of Force-Displacement with Output Function
Peeling tester/Economical digital force gauge/
Attachment for friction test/
FRT
-Simple button operations
-Easy programming of measurement
-With an included software, the transition of load can be easily drawn into a graph
-Hygiene maintenance is easy since it is designed to take probes or tables off
-With various kinds of probes, a variety of samples can be tested in different ways
Click here for detail
Available from August/01/2011
MX2-500N
-LCD is attached
-Speed digitally settable, timer, counter are attached as standard function. Good for endurance test
-The main shaft is stroger and enable to avoid bending, which improves accuracy of measurement by applying force more accurately.
-Control by force and stroke limit knob is available (under some condition)
Click here for detail
Available from February/01/2010
MX2-1000N / EMX-1000N
-LCD is attached
-Speed meter, timer, counter are attached as standard function. Best for endurance test
-The main shaft is stroger than old model, which improves accuracy of measurement.
-Control by force / stroke limit knob/ displacement(EMX-1000N only) is available (under some condition)
Click here for detail
Available from June/01/2009
MS-50N Series
-Compact and light design suits for handy use. Usable at various workplaces.
-Knob operation makes delicate movement possible
-Optional handle makes measurement easy and convenient operation
-Displacement and force can be measured and graph is available with F-S Master-MSL-**N
Click here for detail
Available from March/06/2009
MTG Series
-Measure precisely by equation of measurement speed
-Function of USB data output
-Automatic measurement function by Hi/Low set up values
-Easy grip and simple operation
-Precise measurement by high speed sampling
-Draw graph of torque-time by optional software
Click here for detail
Available from June/01/2008
F-S Master
-Easy to draw force-displacement graph
-More precise peak value with high-speed sampling
-Economy price, suit well with daily quality control
-Simple operation, easy to use
-Easy to make graph with USB correspondence
-Indicate five graphs at the same time and analyze
Click here for detail
Available from January/01/2008
IPT200-5N
-Capacity: 5N
-Stroke: 200mm
-Speed range: 120~1500mm/min
-Maximum sample width: 88mm
-Specialized software is included
Click here for detail
Available from September/01/2006
DS2 series
-Accuracy: +/-0.2%F.S. +/-1digit
-Sampling rate: 1000 times/sec
-Output function: RS-232C, analog,
Mitutoyo digimatic
-Display reverse function
-Peak hold function
Click here for detail
Available from July/01/2006
COF-10N
-Movement weight: 10N
-Stroke: 150mm
-Sample thickness: Maximum 1.5mm/min
Click here for detail
Available from April/04/2006
