New Products


Attachment for Compression Test of Syringe MED-SCT-500N

– This attachment is designed for compression test of syringe.
– It handles syringes in capacity from 0.5 up to 50ml.
– It enables compression test according to a part of ISO 7886-1:2017.

Standard Model Digital Force Gauge ZTS series

– High sampling rate (Max.2000 data / sec.) : Captures force value more precisely.
– Clear high brightness display (Organic EL)
– Easy set up with languages.
– Multi display function: you can customize the display.

High Functionality Model Digital Force Gauge ZTA series

– Save continuous data in USB flash drive. (USB flash drive is not included.)
– Displacement I/O. (Necessary to be combined with a linear scale.)
– High sensitivity (Max.2000Hz) provides accurate test result for even quick action testing.
– Excellent readability due to clear, highly bright display (Organic EL)
– Multi display: You can indicate time, peak values, and more as well as measured value.

Digital force gauge for hand held DST series

– You can connect maximum 4 pcs of DST to a PC at the same time, for easier management. (You need a dedicated optional software.)
– Using a supplied software (Force Logger) and USB cable, you can easily transfer data from DST to PC.
– DST-2N/5N/20N/50N has a mechanical stopper for preventing overload.
– You can charge DST from a PC or a mobile battery.
– Battery life lasts 30 hours at maximum when its backlight is off.

Attachment for Probe Tack Test MED-IS-20N

– Designed for probe tack test of adhesives such as adhesive plaster (bandage)
– Partly complies with ASTM Standard

Digital force gauge for handheld use (Advanced model) DSV series

– DSV has a tilt-sensing function, sounding an alarm when it sense tilt from the default position.
– DSV is equipped with internal memory up to 1000 point.
– Using a supplied software (Force logger) & USB cable, you can easily transfer data from DST to PC.
– You can connect maximum 4 pcs of DST to a PC at the same time, for easier management. (You need a dedicated optional software.)
– DSV-2N/5N/20N/50N has a mechanical stopper for preventing overload.
– You can charge DST from a PC or a mobile battery.
– Battery life lasts 30 hours at maximum when its backlight is off.

Attachment for Needle Bonding Strength Test MED-NPT-200N

– Designed to evaluate the force of pulling out the needle apart from the hub
– Suitable for needles with diameter from 0.3 to 2.0mm
– Partly complies with JIS and ISO Standards

Peel Tester for Embossed Carrier Tape's Cover Film IPTS-5N (Complying with a part of IEC 60286-3:2013)

Peel Tester for Embossed Carrier Tape’s cover film IPTS-5N
IPTS-5N_150
-Designed exclusively for peel test of embossed career tape. It can perform test according to a part of IEC 60286-3:2013 “Packaging of components for automatic handling – Part 3: Packaging of surface mount components on continuous tapes”, and a part of JIS C0806-3:2014 “Packaging of components for automatic handling-Part 3: Packaging of surface mount components on continuous tapes”
– Easy sample setting and simple operation.
– Accessory software graphs the measurement accurately due to its high sampling rate, Max.2000Hz.

Optional handle for a fire door closing measurement HDC-1

Combining this handle with a force gauge, you can measure a fire door closing force according to the building standard law in Japan.

Separate Sensor Model Digital Force Gauge ZT series

High performance digital indicator (Sensor separate model force gauge) ZT series are now available.

– Sensor (load cell) separated.
– Various types of sensors available to suit your measurement conditions.
– High sampling rate (Max.2000 data / sec.) : Captures load value more precisely.
– Clear high brightness display (Organic EL)

Attachment for loop tensile strength test LOP-1000N

– Designed to fix cable ties
– Enables the tensile strength test up to 1000N
– Partly complies with UL and SAE Standard
– Includes 2 sizes of split mandrel (part for winding the cable ties)

Automatic Crimp Tester ACT-1000N (Partly in accordance with UL 486A-486B)

2015.8 Automatic Crimp Tester ACT-1000N is released on Aug 1st.

– The start button provides smooth flow from Testing to Data saving including OK/NG judgment.
– Save the test conditions up to 26 patterns.  The suitable setting is able to be set instantly.
– 2 test modes are available “BREAK mode” and “KEEP mode”.
–  It can partly measure the test in accordance with standards JIS C2805 and UL 486A-486B.

Motorized Torque Stand MTS series

2015.4  New arrival Motorized Torque Stand MTS series
・More accurate torque measurements are possible by the stable rotating speed.
・A variety of measurements are available such as Torque Control Functions and Torque-Angle measurements.
・The plentiful clamp attachment lineup realizes torque measurement for various samples.

Attachment for Polypropylene (PP) Strapping Band Tensile Test PPC-5000N

– Designed to clamp PP strapping band firmly without slipping
– Wrapping clamp reduces crisping of PP strapping band
– Performs tensile strength test up to 5000N

Force-Displacement Measurement Unit (for Tactile Test) FSA series

March.29th FSA series Force Displacement Measuring Unit are now available.

 

– Measuring unit to draw force displacement curve easily.
– This unit includes a force gauge ZTA series, a test stand with a linear scale, cable, a graphing software, and attachments to perform force-displacement measurement.
– Ideal for feeling testing or material characteristic evaluation since force-displacement relation is clearly visible with graphs.
– High sampling rate (2000Hz) provides accurate results for even quick movement testing.
– Simple operation, Easy setting
– Useful functions: to output displacement values when load values reach the peak, to reset displacement values at chosen load values, etc.

 

Sensor Interchangeable Amplifier eZT

Sensor Interchangeable Amplifier eZT is released on Aug 1st.

– One amplifier for use with various load cells without readjustment.
– Interchangeable sensors of different types; compression, tension, torque and more.

Software for Data Management of Multiple Force Gauges Force Logger Plus

-Manages data up to 4 pcs of force gauges simultaneously.
-Acquires single and continuous data to show pass-fail result quickly and clearly.
-Manages force gauge by its serial No. with name, and calibration data.
-Easy connection by the supplied USB hub.

Urethane Spherical Compression Jig UR-8S/UR-8M

Feb.11th Urethane spherical jig for compression test UR series are available.

– Urethane made, spherical shaped jig for compression test.
– It is close to the sense that a person operates something.
– Suitable for final inspection since the soft material reduces the damage of samples.
– 2 levels of hardness are available.

Press Test Fixture PR-500N/2500N

Mar. 19th, 2012  Press test fixture PR series is launched.

– Ideal for durability (burst strength) test of retort pouch or heat sealing packaging.
– This fixture is in accordance with JIS Z0238 :1998 “Testing methods for heat sealed flexible packages.”

pageTop

TEL +81-0532-33-3288

©Copyright IMADA CO.,LTD. All rights reserved.