Digital Force Gauge ZT series
Digital Force Gauge ZT series
~Using with Test Stand and Software~
High capacity model digital force gauge from 2500N(250kgf) to 5000N(500kgf). Both ZTS/ZTA series are available.
[Mutual Features and Functions of ZTS/ZTA series]
For Accurate Force Measurement
IMADA Digital Force Gauge ZT series measures compression and tension force.
The accuracy +/-0.2% F.S. and the 2000Hz high speed sampling rate capture accurate force values of testing.
High Visible Display & Lamps
The display is adopting OEL. It enables to show force values, unit and others very clearly.
The display has 3 separated rows. They show Force and the necessary information at the same time
such as date, time, high/low setting points and No. of stored data.
The LED lamps above the force gauge help easy checking whether the displayed force is between setting points.
ZT series equips a lot of useful functions for force measurement.
Peak hold function, Data sending function (up to 1000 points to the internal memory), Pass/Fail decision and more. High-operability force measurements are possible.
Many types of output signals are available such as USB, analog , RS232C and more.
Using including software ZT logger, ZT series is able to output the data stored in the internal memory to a PC.
Continuous test data output is also possible at 10 data/ sec.
Using optional software Force Recorder (Light / Standard), draw a force- time graph at 2000 data/sec on PC.
It is ideal for detailed analyses.
[ZTA series Original Function]
Direct Data Output for a USB Flash Drive
Not only stored data but also continuous data can be output
for a USB flash drive at 100Hz, 50Hz or 1Hz. ( The sampling rate is selectable.)
Connecting a force test stand with a linear scale or a built-in linear scale DMK series,
force-displacement measurement is possible.*
* There is a Force-Displacement Measurement Unit FSA series
including necessary items of force- displacement measurement and analyses.
Other digital force gauge which might be more suitable for your needs:
Standard Model Digital Force Gauge: ZTS series
Standard model digital force gauge from 2N (200gf) to 1000N (100kgf).
High Functionality Model Digital Force Gauge: ZTA series
Advanced model digital force gauge from 2N (200gf) to 1000N (100kgf).
Displacement I/O and direct data sending to a USB flash drive are possible.
Separate Sensor Model Digital Force Gauge: ZT series
For testing at a difficult place for reaching or mounting a regular-type force gauge.
Sensor Interchangeable Amplifier (Force Gauge) : eZT
For various force measurements by sensor interchange.
If you need further information, please click each model name to go to the product web page.
Specifications for High Capacity Model Digital Force Gauge ZT series
|Feature||Advanced model with various functions such as data saving
in USB memory stick, displacement I/O and more.
|Standard model with the same benefit in performance as ZTA series but reduced functions.|
|Unit of measurement (*1)||N, kgf, lbf (*2)|
|Display update||16 times / sec.|
|Sampling rate||2000 data / sec. (max) (*3)|
|Battery||8 hours (2 hours charge)(*4)|
|Safe overload rating||Approx.200%F.S.|
|Operating environment||Temperature: 0 to +40 degree Celsius Humidity: 20 to 80%RH|
|Function||Customized display (header and footer), Peak hold (tension and compression),
Internal 1000 points data memory,
Comparator (judgment of acceptance or rejection), Reversible display, Sign inversion,
Zero clear timer, +NG alarm, Off timer (auto power off), Dumping, Date/time display, Setting lock
|1st/2nd peak, Displacement detection at force peak value, Displacement zero reset at selected force||-|
|Output||USB, RS232C, Mitutoyo digimatic (*5), 2 VDC analog output (D/A), Comparator 3 steps (-NG/OK/+NG)|
|Sub comparator 2 steps (output of large or small judgment)USB flash drive, Displacement||-|
|Overload warning||Approx.110%F.S. (Warning message shows up and alarm goes off )|
|Available linear scales (*6)||- Online driver output (a line receiver according to RS422/485 must be built in.)
- Open collector output (Voltage drop between contacts must be smaller than 0.5V.)
|External connecting switch||SEND (a point of contact holding), Zero reset, Peak ON/OFF setting|
|Dimensions||Please refer to dimensions.|
|Accessory(*6)||AC adapter, Inspection certificate, CD driver (including simple software for data log),
Attachments (The set of attachments varies according to range.), USB cable, Carrying case.
|Adapter for USB flash draive (*8)||-|
*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 The battery is more consumed when connected to USB flash drive or a linear scale.
*5 Not always available for Mitutoyo digimatic products.
*6 Some linear scales could not be available even if they meet the mentioned specifications.
*7 Weight is slightly different according to range.
*8 USB flash drive is not included.
Model List for High Capacity Model Digital Force Gauge ZT series
|ZTA-2500N||ZTS-2500N||2500N (250kgf)||2500N/2.500kN (250.0kgf)||1N/0.001kN (0.1kgf)||M10|
|ZTA-5000N||ZTS-5000N||5000N (500kgf)||5000N/5.000kN (500.0kgf)||1N/0.001kN (0.1kgf)|
*lbf indication is also possible.