It can be used as a force gauge which can be interchanged the connected load cell (force sensor) without an adjustment.
Basic functions are same as ZTA series digital force gauge. For many types of force measurements.
[Features and Functions]
High Speed Sampling Rate
The 2000Hz high speed sampling rate captures accurate force values of testing.
High Visible Display & Lamps
The display is adopting OEL. It enables to show force values, unit and others very clearly.
The display has 3 separated rows. They show Force and the necessary information at the same time
such as date, time, high/low setting points and No. of stored data.
The LED lamps above the force gauge help easy checking whether the displayed force is between setting points.
It equips a lot of useful functions for force measurements.
Peak hold function, Data sending function (up to 1000 points to the internal memory), Pass/Fail decision and more.
High-operability force measurements are possible.
Many types of output signals are available such as USB, analog , RS232C, displacement I/O, USB flash drive and more.
Using including software ZT logger, it is able to output the data stored in the internal memory to a PC.
Continuous test data output is also possible at 10 data/ sec.
Using optional software Force Recorder (Light / Standard), draw a force- time graph at 2000 data/sec on PC.
Using another optional software Force Recorder (Professional) and
connecting a force test stand with a linear scale or a built-in linear scale DMK series,
force-displacement measurement is possible. It is ideal for detailed analyses.
1. Overall accuracy is calculated as the total of the accuracy of amplifier (+/- 0.2%F.S.) and
load cell (see each specification sheet).
2. Please calibrate before using eZ-Connect series. The amplifier is not calibrated with any load cell.
Please request calibration for each combination and calibration report if required (available at a charge).
Other digital force gauge which might be more suitable for your needs:
Separate Sensor Model Digital Force Gauge: ZT series
For more accurate testing at a difficult place for reaching or mounting a regular-type force gauge.
High Functionality Model Digital Force Gauge: ZTA series
This digital force gauge has the same functions as eZT.
It has an internal sensor which accuracy is +/-0.2% F.S. and available capacity is from 2N (200gf) to 1000N (100kgf).
Standard Model Digital Force Gauge: ZTS series
This force gauge is the model removed Displacement I/O and Direct output for a USB flash drive from ZTA series.
High Capacity Model Digital Force Gauge: ZT series
This force gauge has an internal sensor. For 2500-5000N force measurement. Both ZTS/ZTA are available.
If you need further information, please click each model name to go to the product web page.
Specification for eZ-Connect series Sensor Interchangeable Amplifier (Force Gauge) eZT
|Unit of measurement||Depends on load cell and settings
(N, kN, kgf, lbf N-m, N-cm, kgf-m, kgf-cm, lbf-in, ozf-in)
|Display update||16 / sec|
|Sampling rate||2000 data / sec at maximum (*2)|
|Battery||8 hours (2 hours charge) (*3)|
|Operating environment||Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH|
|Functions||Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory,
Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer, +NG alarm,
Off timer (auto power off), Dumping,Time display, 1st/2nd peak,Displacement detection at force peak value,
Displacement zero reset at selected force, setting lock
|Output||USB, RS232C, Mitutoyo digimatic (*4), 2 VDC analog output (D/A),
Comparator 3 steps (-NG/OK/+NG), Overload alarm, Sub comparator 2 steps (output of large or small judgment),
USB flash drive, Displacement.
|Overload warning||Approx.110%F.S. (Warning message and alarm )|
|External connecting switch||SEND (a point of contact holding), Zero reset, Peak ON/OFF setting|
|Available liner scales (*5)||- Online driver output
(a line receiver according to RS422/485 must be built in.)
|- Open collector output
(Voltage drop between contacts must be smaller than 0.5V.)
|Dimensions||Please refer to dimensions.|
|Accessories||AC adapter, CD driver (including simple software for data logging),
Force Recorder Professional (Trial ver.),
USB cable, Carrying case, Adaptor for USB flash drive (*6)
*1 These are the specifications for International model.
Please note that this unit is different from Japanese domestic model and international one.
*2 The accuracy of load cell is added when using connected with a load cell.
*3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 The battery is more consumed when connected to USB flash drive or a linear scale.
*5 Not always available for Mitutoyo digimatic products.
*6 Some linear scales could not be available even if they meet the mentioned specifications.
*7 USB flash drive is not included.