Peel / Adhesion

Peel (adhesion) testing is performed to measure adhesive (bonding) strength between 2 materials.


Application Examples


Movie
Adhesive tape 90 degree peel (bond) strength test

This is the 90 degree peel test of adhesive tape. The fixture (P90-200N) keeps peel degree at 90. IMADA provides testing system in accordance with JIS.

Product configuration example
JIS Z 0237(2000) “Testing methods of pressure-sensitive adhesive tapes and sheets” (Only P90-200N)

※ZTS series force gauge is recommended in this test. Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery


Movie
Circuit board print (copper layer) peel strength test

This is the peel (bond) strength test of copper print on circuit board.

Product configuration example
JIS C5016 (1994) “Test methods for flexible printed wiring boards”

※ZTS series force gauge is recommended in this test. Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery


Movie
Adhesive tape 180 degree peel (bond) strength test

This is the 180 degree peel test of adhesive tape. The fixture (P180-200N) keeps peel degree at 180. IMADA provides testing system in accordance with JIS.

Product configuration example
JIS Z0237(2000) "Testing methods of pressure-sensitive adhesive tapes and sheets"

※ZTS series force gauge and MX2-500N-L (stroke extended model) are recommended in this test. Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery

Adhesive tape peel strength test
Movie mp4
Adhesive tape peel strength test

This is the 180 degree peel test of adhesive tape. IPT series are designed for peel test only, so it makes measurement efficiency higher.

Product configuration example
A peel test part of ISO 29862: 2007 [Self adhesive tapes−Determination of peel adhesion properties] (A peel test part of JIS Z 0237: 2009)

※Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery

Embossed carrier tape peel (adhesion) test
Movie mp4
Embossed carrier tape peel (adhesion) test

This is the peel strength (adhesion) test of embossed carrier tape. With IMADA IPT series, you can perform the peel test in accordance with IEC and JIS.

Product configuration example
IEC 60286-3:2013 "Packaging of components for automatic handling-Part 3: Packaging of surface mount components on continuous tapes" (Partly) (Corresponding Japanese standard: JIS C0806-3:2014)

※Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery


Movie
Hook and loop fastener peel strength test

This is the peel (bond) strength test of hook and loop fastener.

Product configuration example

※ZTS series force gauge is recommended in this test. Besides, 2 pieces of GC-1100 are necessary to perform this test. Finally, some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery

Heat seal strength test
Movie mp4
Heat seal strength test

This is the peel test of heat seal of a variety of packaging bags snack for food etc.

Product configuration example

※ZTS series force gauge is recommended in this test. Besides, 2 pieces of FC series grips are necessary to perform this test. Finally ,some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery


Movie
Cup film lid opening (peel) strength test

This is the peel test of film lid of cups for such as pudding or jelly.

Product configuration example
JIS S0022(2001) "Guidelines for all people including elderly and people with disabilities-Packaging and receptacles-Test methods for opening"

※ZTS series force gauge and MX2-500N-V600 (speed changed model) are recommended to perform testing according to JIS S0022. Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery

Chip components solder joints shear strength test
Movie mp4
Chip components solder joints shear strength test

This is the shear test to ensure sloder joint strength of chip components. IMADA provides testing system in accordance with JIS.

Product configuration example
JIS Z 3198-7: 2003 "Test methods for lead-free solders-Part 7: Method for shear strength of solder joints on chip components"

※ZTS series force gauge is recomended in this test. Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery

Probe tack test of adhesive plaster (bandage)
Movie mp4
Probe tack test of adhesive plaster (bandage)

This is probe tack test of  adhesive plaster (bandage) to measure its adhesive strength by using IMADA test unit.

Product configuration example
ASTM D2979:2016 'Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine' (Partly)

※It is necessary to activate the force control mode of force gauge by connecting the optional cable to meet the requirement of contact load which specified in ASTM standard.
Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery


Movie
Book binding adhesion (bond) test

This test is performed to ensure binding adhesion (bonding) strength of pages.

Product configuration example

※ZTS series force gauge is recommended in this test. Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery


Movie
Cheese texture (viscosity or hardness) analysis

This is the cheese texture (viscosity or hardness) analysis.

Product configuration example

※Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery


Movie
Hand cream viscosity (softness) test

IMADA offers a high quality, high accuracy testing system for hand cream viscosity (softness).

Product configuration example

※Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery


Movie 【Waiting】
Concrete strength test

This is performed to analyze transition in time of concrete viscosity (tension strength).

Product configuration example

※ZTS-5000N force gauge and MX-5000N test stand are recommended in this test. Some samples cannot be measured depending on their materials or shapes, so please contact us for technical advice before purchase decision so that we offer the best testing system for you.

Inquiry about this testing application

Usage/Specification Quote/Delivery

pageTop

TEL +81-0532-33-3288

©Copyright IMADA CO.,LTD. All rights reserved.