Maintenance

We recommend that you inspect measuring instruments and replace consumable parts periodically to avoid breakdown and make them last for a long time. We introduce inspection method examples here.

Inspection of measuring equipment

Accuracy Inspection (Force gauges / Load cells / Torque gauges)

Please inspect accuracy by standard test weight regularly.
We also offer calibration service, so please make use of it.

Mechanical Force Gauges

  • We recommend that a mechanical force gauge gets accuracy inspection by weights regularly.
  • Turning on peak switch, please add load to check if a pointer needle holds on enough.
  • Please check if its thread does not have scratches or distortion.

Digital Force Gauges

  • We recommend that a digital force gauge gets accuracy inspection by weights regularly.
  • Please check if its thread does not have scratches or distortion.
  • We recommend that its battery should be replaced when its life becomes shorter.

Test Stands

  • We recommend that an actuator of a test stand should be greased.
  • Shaft part: Please use lithium-based grease
  • Screw part: Please use molybdenum disulfide-based grease
  • * Please do not use lubrication or silicon spray since they may include cleaning ingredients and they are easy to volatilize.

Attachments

Please inspect if grips’ teeth are deteriorated or not.

Top

TEL +81-0532-33-3288

©Copyright IMADA CO.,LTD. All rights reserved.