NEW Manual hand wheel operation stand HV-500NΠ
Applicable for a full-scale force measuring while restraining the cost
Rotational handle operation makes stable measuring possible.
Capacity : 500N(Approx. 50kgf)
Stroke : 350mm
One turn of handle wheel : 2mm
Function : Mechanical stopper
Weight: Approx. 10kg
Option : Measuring device
|
Specification
|
Vertical manual operation stand HV-100W/HV-300W
For high capacity measuring, the screw feed mechanism permits smooth measuring with hand wheel operation.
Both tension and compression measuring can be done.
Capacity : 1000N(HV-100W), 3000N(HV-300W)
Stroke : 350mm
One turn of handle wheel : 1.2 mm
Weight : Approx. 15kg
Option : Measuring device
|
Specification
|
Wire harness pull tester LH-50
Measure pull-off force of electrical leads.
Efficient measuring can be done with an lever operation.
Capacity : 500N(Approx. 50kgf)
Stroke : 60mm
Weight : Approx. 12.5kg
Option : Attachments 2pcs.
|
Specification
|
Horizontal manual operation stand SH-100W/SH-300W
For high capacity measuring, the screw feed mechanism permits smooth measuring with hand wheel operation.
Both tension and compression measuring can be done.
Capacity : 1000N(SH-100W), 3000N(SH-300W)
Stroke : 200mm
One turn of handle wheel : 1.2mm
Weight: Approx. 17kg
Option : Measuring device
|
Specification
|
Manual stand SV-05(Fine feed)
Suitable to measure minute force. Best suited for measuring of silicon rubber sheet switch, etc.
Capacity : 20N(Approx. 2kgf)
Stroke : 0 to 70mm
Knob turning : 22.5mm
Weight : Approx. 2kg
Option : Measuring device
|
Specification
|
Manual lever operation stand SV-1(Lever operation)
More efficient compression measuring is achieved by lever operation
By the adjustable mechanical stopper, compression amount is maintained to be constant.
Capacity : 500N(Approx. 50kgf)
Stroke : 60mm
Fixed position : 0 to 240mm
Weight : Approx. 9kg
|
Specification
|
