Optional attachments

Optional attachments Compression /Tension/Other/ Optional handle /

Special attachments are available for various applications.
(* Some attachments are not applicable for certain material.)

Compression

Large flat head Attachment for compression test (Detail)	Various compression attachments Select from various types and sizes (Detail)
•Capacity: 200N(A), 500N(S) A-40 S-40 •Outer diameter: Φ40 A-60 S-60 •Outer diameter: Φ60	•Capacity: 5000N PC series(Disk type) •Dimension: Φ40, 60, 100mm SQ series(Rectangletype) •Dimension: 30x20, 75x50, 150x100mm SP series(Sphere type) •Dimension: SphereΦ10, 20, 30mm
Penetrating pin gauge Suitable for checking hardness of clay-like materials by inserting it into certain depth. (Detail)	Bend test stand For bending and compression test (Detail)
•Length: 20mm •Capacity: 100 to 200N PG-2 •Outer diameter: Φ2 PG-3 •Outer diameter: Φ3 PG-4 •Outer diameter: Φ4 PG-5 •Outer diameter: Φ5	GA-10N •Capacity: 500N •Sample width: 5 to 60mm GA-5000N •Capacity: 5000N •Sample width: 5 to 70mm

Film grip Suitable to grip thin film test piece. (Detail)	Flat chuck Multipurpose chuck to grip from thin to thick test piece (Detail)	Wedge grip The grip clamps automatically by pulling test piece. (Detail)
FC-21 •Capacity: 250N •Jaw face width: 20mm •Opening width: 0 to 2mm FC-20 •Capacity: 500N •Jaw face width: 20mm •Opening width: 0 to 2mm FC-40 •Capacity: 500N •Jaw face width: 40mm •Opening width: 0 to 2mm	GC-1001 •Capacity: 1000N •Jaw face width 20mm •Opening width: 0 to 10mm GC-1021 •Capacity: 1000N •Jaw face width 20mm •Opening width: 0 to 20mm GC-5000 •Capacity: 5000N •Jaw face width 37.5mm •Opening width: 0 to 30mm	KC-100 •Capacity: 500N •Opening width: 0 to 6mm KC-1001 •Capacity: 1000N •Opening width: 0 to 3.5mm KC-5000 •Capacity: 5000N •Opening width: 0 to 6mm
Fine point grip Suitable for griping small gauge wire in small area. (Detail)	Small grip Suitable for griping thin test piece (Detail)	Tape grip The more clamping force is obtained automatically as the more tensile force is applied to test piece. (Detail )
FP-51 •Capacity: 50N •Opening width: Max. 0.5mm FP-50 •Capacity: 100N •Opening width: Max. 0.5mm	•Opening width: 0 to 1mm SC-3 •Capacity: 100N •Jaw face width: 3mm SC-8 •Capacity: 150N •Jaw face width: 8mm	•Capacity: 500N •Sample thickness: 0 to 2mm GC-60 •Sample width: 0 to 30mm GC-100 •Sample width: 0 to 50mm
Cam grip The cam grip is for thin strip specimen and is self-tightened automatically by applying tension force. (Detail)	Wire wrapping grip Fixing string, wire, etc. by wrapping them to the grip. (Detail)
GR-30 •Capacity: 500N •Sample width: 0 to 30mm •Sample thickness: 0 to 2mm GR-2000 •Capacity: 2000N •Sample width: 0 to 50mm •Sample thickness: 0 to 4mm	GC-30 Capacity: 500N WC-2000 Capacity: 2000N

Other optional attachments To Top

Pin grip Applicable for both compression and tension force. Ideal for gripping small diameter needle-like test piece. (Detail)	Jacob's chuck Applicable for both compression and tension force. Capable for gripping shafts and rods. (Detail)	Peeling attachment Suitable for peeling test of chips which are soldered or bonded. (Detail)
•Capacity: 100N PC-05 •Opening width : 0 to Φ0.5 PC-1 •Opening width: Φ0.5 to Φ1.0 PC-2 •Opening width: Φ1.0 to Φ2.0	GC-5 •Capacity: 500N •Opening width: Φ0.5 to Φ6.5 GC-15 •Capacity: 1000N •Opening width: Φ2.0 to Φ13	•Capacity: 500N GT-10 •For tension GT-20 •For compression
Vise grip The vise grip is attached on the table of a test stand. (Detail)	X-Y table The table is attached on the table of a test stand and is adjusted for test piece alignment.(Grip mounting adapter is required.) (Detail)	Grip mounting adapter Grip mounting adapter to the test stand base. (Detail)
GT-30 •Capacity: 1000N •Jaw face width: 38mm •Opening width: 0 to 39mm	GT-20-3 Capacity: 500N Travel on X, Y directions: +/-30mm	GF-1
90 degree peel table Suitable for 90 degree peel adhesion test (Detail)
P90-200N •Capacity: 200N •Sample length : 155mm •Sample width : 80mm

Optional handles To Top

For mechanical force gauge (Sketch drawing)	For digital force gauge (Sketch drawing)
MOH-1 •Weight: Approx. 810g •Applicable for PSS/PS, PSM, FS/FB series	DOH-1 •Weight: Approx. 740g •Applicable for DPZ, DPS series