Peeling tester/Economical digital force gauge/
Attachment for friction test/Motorized test stand/
Manual operation stand/Handy manual operation stand/
Screw cap tester/ USB digital force gauge/
Wire harness tester/High capacity motorized stand/
IC pull testerSpeed/length meter/90 degree peel table/
Motorized stand MX series/Motorized stand MV-500NII/Manual stand/
IPT200-5N
-Capacity: 5N
-Stroke: 200mm
-Speed range: 120~1500mm/min
-Maximum sample width: 88mm
-Specialized software is included
Click here for detail
Available from September/01/2006
DS2 series
-Accuracy: +/-0.2%F.S. +/-1digit
-Sampling rate: 1000 times/sec
-Output function: RS-232C, analog,
Mitutoyo digimatic
-Display reverse function
-Peak hold function
Click here for detail
Available from July/01/2006
COF-10N
-Movement weight: 10N
-Stroke: 150mm
-Sample thickness: Maximum 1.5mm/min
Click here for detail
Available from April/04/2006
MX-1000N
-Capacity: 1000N
-Stroke: 400mm
-Speed range: 8~240mm/min
-3 types of measurement mode(MX series)
-Omitting heavy labor
Click here for detail
Available from September/01/2005
HV-1000N
-Capacity: 1000N
-High usability
-Stroke: 430mm
-1.2mm/one complete turn of hand wheel
Click here for detail
Available from April/25/2005
KV-50N
-For precise measurement
-High usability
-Lightweight
-Capacity: 50N
-Stroke: 70mm
Click here for detail
Available from April/01/2005
DTX2
-For torque of screw caps
-Easy to clamp bottles
-Easy data processing
-1000 times/sec sampling
Click here for detail
Available from November/01/2004
ZP series
-USB output function is available
-1000 times/sec sampling speed
-Comparator Hi/Low set points
-High usability
-Various functions
Click here for detail
Available from July/01/2004
LH-500N
-For crimped strength
-Easy to clamp by wedge grips
-Wide terminal attachment for wide samples
Click here for detail
Available from April/01/2004
for high capacity
MX-5000N
-Capacity:5000N
-Special function by using with DPZH series
-Upper and lower limit
-Speed:6-180mm/min
-Stroke:350mm
-Manual/Single/Continuous mode
-To increase repeatability of measurement
-For work saving of measurement
Click here for detail
Available from April/01/2004
TIP^QFP series
-For IC lead and tip reliability test
-For 45 degree IC lead pull test
-For 90 degree tip shear test
-For quality control of pcb lead free soldering strength
Click here for detail
Available from April/01/2004
Speed/length meter EN-00
-Option for MX series,MV-500NII
-Display for speed and length
-Display hold function
-Suitable for evaluation of force-length peculiarity
Click here for detail
Motorized stand
Available from Oct/27/2003
P90-200N
-Capacity : 200N
-Suitable for 90 degree peel adhesion test
-Sample length : 155mm
-Sample width : 80mm
Click here for detail
Available from Oct/27/2003
MX-2000N
-Capacity:2000N
-Special function by using with DPZ series
-Upper and lower limit
-Speed:6-180mm/min -Stroke:350mm
-Manual/Single/Continuous mode
-To increase repeatability of measurement
-For work saving of measurement
Click here for detail
Available from Jun/01/2003
MV-500NII/MX-500N
-Capacity:500N
-Upper and lower limit
-Speed:10-300mm/min
-Stroke:350mm
-To increase repeatability of measurement
-Better function model MX-500 is also available
Click here for detail
Available from May/19/2003
Manual test stand
HV-500NII
-Capacity:500N
-Small and light weight
-Mechanical stopper function
-2mm/one complete turn of hand wheel
-Stroke:350mm
-To increase repeatability of measurement
Click here for detail
Available from May/12/2003
