Standard Model Mechanical Force Gauge
PS / PSS series

Dynamometer PS/PSS series
PS/PSS series Mechanical force gauge (Dynamometer)

Inquiry about Standard Model Mechanical Force Gauge PS / PSS series

Usage/Specification Quote/Delivery Repair/Calibration

Feature

– High accuracy.
– Peak hold function.
– Zero adjustment for tare weight.


Specifications for Standard Model Mechanical Force Gauge PS series

Model PS / PSS Series
Accuracy +/-0.1% F.S
Stroke 10mm
Unit of measurement Please refer to the table below
Reading method Real-time track or Peak-hold
Divisions 100lines*
Operating temperature 0 to +40 degree Celcius
Weight ** Approx. 670g(PS-500N)
Accessory 8 kinds of attachments,Inspection certificate, Instruction manual, Carrying case

*30N, 300N, 3K, 30K, 30lb : 120 divisions.
**Weight varies according to the capacities even in the same series, so we note the weight of the most representative one.

 

Model table of PS / PSS series Standard Model Mechanical Force Gauge

Model Capacity 1 division Thread
PS-5N 5N 0.05N M6
PS-10N 10N 0.1N
PS-20N 20N 0.2N
PS-30N 30N 0.25N
PS-50N 50N 0.5N
PS-100N 100N 1N
PS-200N 200N 2N
PS-300N 300N 2.5N
PS-500N 500N 5N
Model(NOT available in Japan) Capacity 1 division Thread
PSS-0.5K 500gf 5gf M6
PSS-1K 1kgf 10gf
PSS-2K 2kgf 20gf
PSS-3K 3kgf 25gf
PS-5K 5kgf 50gf
PS-10K 10kgf 100gf
PS-20K 20kgf 200gf
PS-30K 30kgf 250gf
PS-50K 50kgf 500gf
Model(NOT available in Japan) Capacity 1 division Thread
PS 5lb 5lbf 0.05lbf M6
PS-10lb 10lbf 0.1lbf
PS-20lb 20lbf 0.2lbf
PS-30lb 30lbf 0.25lbf
PS-50lb 50lbf 0.5lbf
PS-100lb 100lbf 1lbf

*In Japan, only N models are allowed to use due to the Measurement Law of Japan.


Dimensions

(Unit:mm)


pageTop

TEL +81-0532-33-3288

©Copyright IMADA CO.,LTD. All rights reserved.