2019/09/02

Participate in a show, 22nd Mechanical Components & Materials Technology Expo (M-Tech) Osaka, on Oct 2nd to 4th.

We will participate the the 22nd Mechanical Components & Materials Technology Expo (M-Tech) Osaka.

– Date and Time: Oct 2nd to 4th 2019 (10:00-18:00) (last day until 17:00)
– Place: INTEX Osaka
– Booth #: 25-1 at Exhibition Hall 5
– Official site of M-tech Nagoya: https://www.japan-mfg-kansai.jp/en-gb/about/mtech.html

Engineers are always be in our booth to give technical advice about force measurement for free.

Please visit our booth and find your best force measurement method!

2019/08/27

Our distributor in Philippines, MESCO, Inc will participate PDMEX 2019 

Our distributor in Philippines, MESCO, Inc will participate PDMEX 2019.

– Date and Time: Aug 28(Wed) – 31(Sat), 2019 10:00 – 18:00
– Place: World Trade Center Metro Manila City, Philippines
– Booth #: Booth No. 11 Lobby Hall D and Booth No. F01-F03 Hall B & C
– Official site of PACKAGING innovation: https://pdmex.weebly.com/

Please visit the booth and find your best force measurement method!

2019/07/25

RoHS3 (EU 2015/863) Statement of Compliance

Thanks for using IMADA force measurement products and services.

 

The original RoHS (EU Directive 2002/95/EC) specified the Restriction of Hazardous Substances in Electrical and Electronic Equipment (EEE). RoHS2 (2011/65/EU) is an updated version of RoHS, and four substances were added to RoHS3 (EU 2015/863), which takes effect on July 22, 2019.

 

We hereby declare that the following IMADA force measurement products comply with RoHS3 (EU 2015/863).

 

・Digital force gauge DST/DSV/ZTS/ZTA series
・Motorized test stand MX/MX2/MH/MH2/EMX series
・Force-displacement analysis FSA series
・Special tester ACT-1000N and FRTS series
・Torque gauge DTXS/DTXA/HTGS/HTGA series
・Motorized torque stand MTS series
・Torque-angle measurement unit TAA-HTG series
・eZ Connect series load cell
・Optional cable

 

However, the following IMADA force measurement products do not comply with RoHS3 (EU 2015/863) now. We aim to upgrade these products to comply with RoHS3 (EU 2015/863) in near future and will update the news accordingly.

 

・Option for test stand  Speed/Length Meter(-E)
    It complies with RoHS3 (EU 2015/863) from 23rd August 2019.
・Option for torque stand Angle Meter(-RA)
    It complies with RoHS3 (EU 2015/863) from 23rd August 2019.
・IPTS series

 

And the following product is out of production. We are working on the substitute product now.

 

・Option for test stand Length scale ( -S)
    It complies with RoHS3 (EU 2015/863) and is on sale from 23rd August 2019.

 

Please feel free to contact us for detailed information.

2019/07/19

New high capacity vertical motorized test stand MX2-5000N will be launched

 

Our high capacity vertical motorized test stand MX2-5000N will be launched on 1st August 2019 in Japan, and 2nd Sep for overseas.
We dedicate to provide a wide range of test stands to meet your needs of force measurements.

 

MX2-5000N

MX2-5000N

 

 

Features

-Digital speed setting from 0.5mm/min
-Improved repeatability
-Simple digital setting of testing modes and speed
-Various functions with force gauge

 

See the details→MX2-5000N

 

2019/07/19

Announcement of Summer Holiday Close from 9th Aug  to 18th Aug

Our office will be closed for summer holiday from 9th Aug  to 18th Aug .
We will resume our business from 19th Aug.

We apologize for any inconveniences caused during this period.  Thank you for your understanding.

2019/04/02

Apr 27th to May 6th  **Spring Holiday Close**

Our office will be closed from April 27th to May 6th due to national holidays.

We will resume working from May 7th.

Thank you for your understanding.

2019/03/21

New high capacity horizontal motorized test stand MH2-2500N will be launched

 

Our high capacity horizontal motorized test stand MH2-2500N will be launched on 1st April 2019.
We dedicate to provide a wide range of test stands to meet your needs of force measurements.

 

MH2-2500N

MH2-2500N

 

 

Features

-Improve convenience of measurement (the frame allows testing flexibility)
-The horizontal design for easy sample setting
-Simple digital setting of testing modes and speed
-Various functions with force gauge

 

See the details→MH2-2500N

 

2019/03/13

Our distributor in Poland, LP Products Lupa sp.j., will participate PACKAGING Innovation

Our distributor in Poland, LP Products Lupa sp.j., will participate PACKAGING Innovation (11th International Packaging trade Fair in Warsaw).

– Date and Time: Apr 2(Tue)-3(Wed) 2019: 10:00 – 16:30 (last day until 16:00)
– Place: EXPO XXI Warsaw
– Booth #: A36
– Official site of PACKAGING innovation: https://packaginginnovations.pl/gb/

Please visit the booth and find your best force measurement method!

2019/03/12

New Attachment MED-ACU-2N has been launched

 

Our new attachment MED-ACU-2N has been launched on 1st March 2019.
We dedicate to provide versatile attachments to meet your needs of force measurements.

 

MED-ACU-2N

MED-ACU-2N

Features

-Designed to measure strength and sharpness of Acupuncture needle
-Available to measure φ0.1~1mm acupuncture needle
-Complies with the corresponding part of JIS standard

 

See the details→MED-ACU-2N

 

2019/03/07

Our distributor in Malaysia, Region Suppliers SDN.BHD, will participate The 25th METALTECH Malaysia

Our distributor in Malaysia, Region Suppliers SDN.BHD, will participate The 25th METALTECH Malaysia ( The 25th International Machine Tools and Metalworking Technology Exhibition).

– Date and Time: May 15(Wed) – 18(Sat), 2019 10:00 – 19:00 (last day until 18:00)
– Place: Malaysia International Trade & Exhibition Centre (MITEC)
– Booth #: 2000 @ Hall 2
– Official site of of METALTECH Malaysia: https://www.metaltech.com.my/

Please visit the booth and find your best force measurement method!

2019/03/06

Participate in a show, the 4th Mechanical Components & Materials Technology Expo (M-Tech Nagoya), on Apr 17to 19th.

We will participate the 4th Mechanical Components & Materials Technology Expo (M-Tech Nagoya).

– Date and Time: Apr 17 (Wed) – 19(Fri), 2019 10:00 – 18:00 (last day until 17:00)
– Place: Portmesse Nagoya
– Booth #: 27-19 at Hall 2
– Official site of M-tech Tokyo: https://www.japan-mfg-nagoya.jp/en-gb.html

Engineers are always be in our booth to give technical advice about force measurement for free.

Please visit our booth and find your best force measurement method!

2019/01/17

Our distributor in Philippines, MESCO, Inc runs a booth in a show, Propak Philippines, on Jan 24th to 26th.

Our distributor in Philippines, MESCO, Inc runs a booth in Propak Philippines.
– Date and Time: Jan 24 (Thu) – 26(Sat), 2019 10:00 – 18:00
– Place: World Trade Center Metro Manila City, Philippines
– Booth #: F39
– Official site of of Propak Philippine: http://www.propakphilippines.com/
– Seminar: January 24, 2019, 16:00- 16:45

Please visit the booth and find your best force measurement method!

2019/01/15

Run a booth in a show, 23rd Mechanical Components & Materials Technology Expo (M-Tech), on Feb 6th to 8th.

We run a booth @ 23rd Mechanical Components & Materials Technology Expo (M-Tech).
– Date and Time: Feb 6 (Wed) – 8 (Fri), 2019 10:00 – 18:00 (last day until 17:00)
– Place: Tokyo Big Sight
– Booth #: E4-6 at East Hall 8
– Official site of M-tech Tokyo: https://www.japan-mfg.jp/en-gb/about/mtech.html
Engineers are always be in our booth to give technical advice about force measurement for free.

Please visit our booth and find your best force measurement method!

2018/11/27

Dec. 28th to Jan. 6th  **Winter Holiday Close**

Our office will be closed from December 28th to January 6th due to national holidays.

We will resume working from January 7th.

Thank you for your understanding.

2018/09/03

Run a booth in a show, Manufacturing Fair 2018, on Oct 17th to 20th.

We run a booth @ Manufacturing Fair 2018.
– Date and Time: Oct 17 (Wed) – 19 (Fri), 2018 10:00 – 17:00 (last day until 16:00)
– Place: FUKUOKA Convension Center
– Booth #: S-56 Floor 1
– Official site of M-tech Tokyo: http://nikkanseibu-eve.com/mono/
Engineers are always be in our booth to give technical advice about force measurement for free.

Please visit our booth and find your best force measurement method!

2018/09/03

Run a booth in a show, 21st Mechanical Components & Materials Technology Expo (M-Tech) Osaka, on Oct 3rd to 5th.

We run a booth @ 21st Mechanical Components & Materials Technology Expo (M-Tech) Osaka.
– Date and Time: Oct 3 (Wed) – 5 (Fri), 2018 10:00 – 18:00 (last day until 17:00)
– Place: INTEX Osaka
– Booth #: 24-1 at Exhibition Hall 5
– Official site of M-tech Tokyo: http://www.mtech-kansai.jp/en/Home/
Engineers are always be in our booth to give technical advice about force measurement for free.

Please visit our booth and find your best force measurement method!

2018/07/10

Announcement of Summer Holiday Close from 10th Aug  to 19th Aug

Our office will be closed for summer holiday from 10th Aug  to 19th Aug .
We will resume our business from 20th Aug.

We apologize for any inconveniences caused during this period.  Thank you for your understanding.

2018/04/24

Run a booth in a show, 22nd Mechanical Components & Materials Technology Expo (M-Tech), on June 20th to 22th.

We run a booth @ 22nd Mechanical Components & Materials Technology Expo (M-Tech).
– Date and Time: June 20 (Wed) – 22 (Fri), 2018 10:00 – 18:00 (last day until 17:00)
– Place: Tokyo Big Sight
– Booth #: W9-2 at West Hall 1
– Official site of M-tech Tokyo: http://www.mtech-tokyo.jp/en/
Engineers are always be in our booth to give technical advice about force measurement for free.

Please visit our booth and find your best force measurement method!

2018/04/24

Run a booth in a show, Machinery & Electronics Exhibition Kanazawa, on May 17th to 19th.

We will run a booth @ Machinery & Electronics Exhibition Kanazawa.
– Date and Time: on May 17th to 19th ( 10:00-17:00)
– Place: Ishikawa Prefectural Industrial Exhibition Hall 3-4 Building
– Booth #: 111 at Exhibition Hall 4
– Official site of Machinery & Electronics Exhibition Kanazawa: http://www.tekkokiden.or.jp/mex/
Engineers are always be in our booth to give technical advice about force measurement for free.

Please visit our booth and find your best force measurement method!

2018/04/19

Apr 28th to May 6th  **Spring Holiday Close**

Our office will be closed from April 28th to May 6th due to national holidays.
We will resume working from May 7th.

Thank you for your understanding.

2018/04/02

New Attachment WG series and Hand Grip Belt HGB-1 have been launched

 

Our new attachment WG series and Hand Grip Belt HGB-1 have been launched on 2nd April 2018.
We dedicate to provide versatile attachments to meet your needs of force measurements.

 

WG Series

WGシリーズ

Features
-Ideal for tensile test of wire-type material
-Winding clamp reduces crisping of sample
-The center groove ensures the sample position to pull straight

 

See the details→Wire Winding Grip WG-250N/WG-1000N/WG-5000N

 

HGB-1

ハンディグリップベルト HGB-1

Features
-Designed to prevent a force gauge slipping from hand
-Enables you to apply force easily

 

See the details→Hand Grip Belt HGB-1

2018/03/02

New software Force Logger Plus has been launched.

 

Our new software for data management of multiple force gauges Force Logger Plus has been launched on 28th Feb 2018. It manages data up to 4pcs of force gauges simultaneously, which helps you to achieve high efficiency in quality control and manufacturing site.

 

Force Logger Plus topics

Image of Force Logger Plus

Feature

-Manages data up to 4 pcs of force gauges simultaneously.
-Acquires single and continuous data to show pass-fail result quickly and clearly.
-Manages force gauge by its serial No. with name, and calibration data.
-Easy connection by the supplied USB hub.

 

See the details→ Software for data management of multiple force gauges Force Logger Plus.

2018/02/28

Run a booth in a show, M-tech Nagoya, on April 11th to 13th.

We run a booth @ M-tech Nagoya
– Date and Time: on April 11th to 13th (11,12th 10:00-18:00, 13th 10:00-17:00)
– Place: Nagoya International Exhibition Hall (Portmesse Nagoya)
– Booth #: 24-20 at Exhibition Hall 2
– Official site of M-tech Nagoya: http://www.japan-mfg.jp/en/Home_Nagoya/
Engineers are always be in our booth to give technical advice about force measurement for free.

Please feel free to visit our booth!

2017/12/11

December 28th to January 8th  **Winter Holiday Close**

Our office will be closed from Dec 28th to Jan 8th due to national holidays.

We will resume working from Jan 9th.

Thank you for your understanding.

2017/11/30

Our new digital force gauges DST/DSV series have been launched.

The new digital force gauges DST/DSV series are enable effective quality control and production due to the brand-new functions.
You can choose 2 lines.

1. This digital force gauge DST offers an excellent cost-performance.

DST series

DST series


 
 
 
 
 
 
 
 
 
 
See the detail→Digital force gauge DST series
 
2. This digital force gauge DSV is equipped with more functions to enable efficient and reliable hand-held use.

DSV series

DSV series


 
 
 
 
 
 
 
 
 
 
See the detail→Digital force gauge DSV series

2017/08/02

Announcement of Summer Holiday Close from Aug 11th to Aug 20th

Our office will be closed for summer holiday from Aug 11th to Aug 20th.
We will resume our business from Aug 21st .

We apologize for your inconvenience during this period.  Thank you for your understanding.

2017/03/31

Run a booth in a show, M-tech Nagoya, on April 12th to 14th.

We run a booth @ M-tech Nagoya
– Date and Time: on April 12th to 14th (12,13th 10:00-18:00, 14th 10:00-17:00)
– Place: Nagoya International Exhibition Hall (Portmesse Nagoya)
– Booth #: 23-60 at Exhibition Hall 2
– Official site of M-tech Nagoya: http://www.japan-mfg.jp/en/Home_Nagoya/
Engineers are always be in our booth to give technical advice about force measurement for free.

Please feel free to visit us!.

2016/12/14

December 29th to January 4th  **Winter Holiday Close**

Our office will be closed from Dec 29th to Jan 4th due to national holidays.

We will resume working from Jan 5th.

 

Thank you for your understanding.

2016/05/13

On May 16th, NEW products Food Hardness Testing Unit FCA-DS2-50N and Simple Lever Test Stand FCA-50N are on sale.

Food Hardness Testing Unit FCA-DS2-50N

Food Hardness Testing Unit FCA-DS2-50N

Simple Lever Test Stand FCA-50N

Simple Lever Test Stand
FCA-50N

 

 

 

 

 

 

 

 

 

 

 

FCA-DS2-50N (left photo) feature

FCA-DS2-50N is testing unit for measuring food hardness.

It fixes compressing distance and performs high repeatability at budget price.

IMADA special fixtures for food are directly mountable on the measuring shaft.

Please see Food Hardness Testing Unit FCA-DS2-50N product page if you need further information.

 

 

FCA-50N (right photo) feature

The test stand is a budget model to enable easy measurement for a fixed distance with simple lever operation.  It is available for various industry from food to electric component.
Please see Simple Lever Test Stand FCA-50N product page if you need further information.

2016/11/28

On November 30th, New Product Food Texture Analyzer FRTS series will be on sale.

Food Texture Analyzer FRTS series Thumbnail

Food Texture Analyzer FRTS series

 

 

Food Texture Analyzer will be on sale from IMADA.
It is capable of professional food texture analysis with the high accuracy +/-0.2%F.S. and 1000Hz sampling rate.
The captured peak value enables to be stored into USB flash drive.
Also, the continuous data values draw into a graph when the analyzer connecting PC installing the included software.
Moreover,  you can intuitively operate with the various equipped preset conditions being selectable from Food /Standard.
You just perform the measurement setup along the displayed guidance on the touch panel screen after selecting the item from Food/Standard.
Please see Food Texture Analyzer FRTS series web page if you need further information.

2016/11/28

October 1st Can Opening Fixture PT series is on sale.

 

Can Opening Fixture PT series

Can Opening Fixture PT series

 

PTF-100N(Left Photo)
It is capable of opening test of a food can tab (Full aperture end)

Test Application Movie→Opening test of a food can

PTD-100N(Right Photo)
It is capable of opening test of a beverage can tab (stay-on-tab).
Test Application Movie→Opening test of a beverage can

 

Both of them are capable of measurement accordance with JIS Z 0022(2001).
Please see Can Opening Fixture PT series web page if you need further information

2016/07/07

Announcement of Summer Holiday Close from Aug 11th to Aug 21st

Our office will be closed for summer holiday from Aug 11th to Aug 21st.
We will resume our business from Aug 22nd .

We apologize for your inconvenience during this period.  Thank you for your understanding.

2016/04/13

Apr 30th to May 8th  **Spring Holiday Close**

Our office will be closed from April 30th to May 8th due to national holidays.
We will resume working from May 9th.

Thank you for your understanding.

2016/03/09

Announcement of Resumption of ISO/IEC17025 Calibration

ISO/IEC17025 calibration has been stopped since Feb 8 2016 due to relocation but it resumes on March 8, 2016.
We apologize for long delivery term. We will reply delivery date and start calibration work in the order.
Please feel free to contact us +81-(0)532-33-3288 when you have a question for the calibration work.

2016/02/02

Announcement of ISO/IEC17025 calibration delivery date

For 3~4 weeks from Feb 8th 2016, we temporarily stop the ISO/IEC17025 calibration due to moving of the calibration room.
During the term, we accept the ISO/IEC17025 calibration but the delivery date is longer than usual.
If you need specific information for the delivery date, please contact us.
We apologize for any inconvenience.
Thank you for your understanding.

2015/12/04

December 26th to January 4th  **Winter Holiday Close**

 

We will be close the office from Dec 26th to Jan 4th due to national holidays.
We will resume working from Jan 5th.

Thank you for your understanding.

2015/12/04

Announcement of Upcoming Exhibition.

IMADA joins the exhibition NEPCON JAPAN 2016.

 

Dates: January 13th to 15th in 2016.

Venue: Tokyo Big Sight, Japan

Booth: No. E19-17 in East Hall 3.

URL:

English     http://www.nepconjapan.jp/en/Home/

Chinese  http://www.nepconjapan.jp/zh-cn/Home/

Korean   http://www.nepconjapan.jp/ko/Home/

 

NEPCON JAPAN is Asia’s Leading Exhibition for Electronics Design, R&D and Manufacturing.
IMADA exhibits the testing applications according to electronic component industries with new items realizing various force measurements.

 

Examples:

–      Analyses for Torque-Angle relationship: TAA series

–      High test efficiency and user friendly for wire crimp pull testing: ACT-1000N

–      For many types of force and torque measurements.
Sensor Interchangeable Amplifier/ Load Cells: eZ-Connect

–      Film & Sheeting Coefficient of Friction Testing System

And more!!

 

Visit our booth and find your best force measurement method!!

 

Please feel free to contact us if you need more detail.

2015/11/25

Announcement of out of production of Eggshell Strength TesterⅡ

We are writing to inform you that we have stopped the production of Eggshell Strength Tester Ⅱ.
Please feel free to contact us (+81-(0)532-33-3288) if you need the replacement.
We appreciate your business and hope we may continue to serve you in the years to come.

Sincerely,

2015/08/20

September 20th to 27th  **Holiday Close**

We will close from September 20th to 27th
The office is re-open on September 28th.
Thank you for your understanding.

2015/07/30

Aug 1st, New product Automatic Crimp Tester ACT-1000N will be on sale.

一覧 ACT-1000N

 

The new product ACT-1000N provides easy and efficient wire crimp pull test.
It carries out from testing to data saving by one button operation.
It is also able to store test conditions up to 26 patterns.
The user can change the suitable condition for each sample immediately.

 

Please visit the web page Automatic Crimp Tester ACT-1000N for the detail.

2015/07/24

August 8th to 16th  **Summer Holiday Close**

We will close from August 8th to 16th.

The office is re-open on 17th of August.

Thank you for your understanding.

2015/07/21

Aug 1st, NEW product eZ connect series amplifier eZT will be on sale.

eZT,eDPU-50N
The one amplifier is able to connect from load cell to another load cell with no adjustment and no setting.

The sensor line-up is various.

The valid situations are

-Using different shaped load cells.

-Measuring different force ranges.

-Preparing another load cell as a spare for preventing operation stop.  etc

 

Click here for the detail of eZ-Connect series Sensor Interchangeable Amplifier eZT!!

 

2015/04/14

Apr 29th to May 6th  **Spring Holiday Close**

We will be close the office from April 29th to May 6th due to national holidays.
We will resume working from May 7th.

Thank you for your understanding.

2015/03/20

On Apr. 1st, Motorized Torque Stand MTS series  and Torque-Angle Measurement Unit TAA series are launched.

 

Motorized Torque Stand MTS series

 

 

 

 

 

 

 

 

 

 

[Features]

-Using with Screw Cap Torque Tester DTXS/DTXA series.

-More accurate torque measurement is available by the stable rotating speed.

-A variety of measurements are availabe such as opening torque auto detection and torque-angle analysis.

-The plentiful clamp attachment line-up realizes torque measurements for various samples.

⇒We also provide the torque-angle measurement unit TAA-MTS series which is included necessary the items.

Click and See the application movie (Using the past model in the movie).

[Testing Application]

Circuit board twist strength test >>

 

 

2014/08/26

On September 1st,  Screw Cap Torque Tester  (Desktop type torque gauge)DTXS/DTXA series are launched.

DTXA Thumbnail【Features】

– Measure the torque of opening PET bottles and bins.
– High repeatability by high speed sampling rate.
– Various sample torque can be measured with the maultipel tables and attachments.
– Useful functions improving work efficiency

*Please click the applications for further information.

 

 

 

 

【Testing Applications】
Key turning torque test >>
Lipstick container turning force test >>
PET bottle screw cap opening torque test>>

*DTXS/DTXA series  are the next generation model of DTX2 series. DTX2 series will be out of production soon.

 

 

2014/07/31

August 9th to 17th  **Summer Holiday Close**

We will close from August 9th to 17th.

The office is re-open on 18th of August.

Thank you for your understanding

2014/04/03

April 26th to May 6th  **Spring Holiday Close**

We will close from April 26th to May 6th.

The office is re-open on May 7th.

Thank you for your understanding.

2014/03/06

March 3rd. Our new Products were released.

1.Horizontal motorized test stand MH2-500N

MH2-500N、ZT サムネ-Horizontal loading is possible.
-Easy and smooth to fix a sample and a force gauge.
-Easy operation to set measurement condition.

 

 

 

 

 

 

2.Handheld type digital torque gauge HTGS/HTGA series

一覧用HTGA-e

-Handheld torque measurement instrument for wide applications
-Changeable attachments expand application possibility
-Multifunction:Peak hold function, comparator evaluation and more
* These are successor models of current HTG2 series.
Plesase note HTG2 series  passed out of production.

 

 

 

 

 

3.Coating surface peeling test attachment TH series
TH Thumbnail
-Peeling strength of coating is measurable by fixing and peeling the head on a coating part.
-It is easy to attach the peeling head with a pin.
-Partly in accordance to JIS K 5600-5-7 (1999) : Testing methods for paints-Part 5: Mechanical property of film- Section 7: Abhesion test (Pull-off methods)

 

 

 

 

 

4.Load cell for foot brakes and hand brakes PK series
PK トピックス用-e

-Measuring force on foot pedals or handbrake levers.
-Easy to attach and measure is possible by hooking on a pedal or a lever.

 

 

 

 

 

We release those 4 products above. Please refer to the each specification for the detail from the links.

2013/12/27

December 28th to January 5th  **Winter Holiday Close**

We will close from December 28th to January 5th.

The office is re-open on 6th of January.

Thank you for your understanding.

2013/10/26

October 1st Calibration service according to ISO17025 has started.

We have been accredited to “ISO/IEC 17025:2005”, an International Standard for Testing and Calibration Laboratories, by an accreditation body, Perry Johnson Laboratory Accreditation INC (PJLA).  The accreditation demonstrates that we are competent to perform particular calibration activities according to ISO/IEC17025:2005 and produce internationally acceptable calibration data.  Hence, we are entitled to use the logo showing the accreditation on our calibration certificate.

We believe that our calibration services will help you improving  reliability of measuring instrument management.

For further information of calibration services according to ISO/IEC17025: 2005>>

ilac-MRA_RGB-200x203ISO17025-accreditation-200x200

pageTop

TEL +81-0532-33-3288

©Copyright IMADA CO.,LTD. All rights reserved.