Zipper is pulled up/down by a optional attachment to test its running smoothness for functionality evaluation and quality control.
- ZTS series is recommended for this test.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
Examples of Product Configuration |
---|
Standard Model Digital Force Gauge ZTS series |
Flat Chuck GC-1100/1200/5000 |
Related Applications
-
Cable ties loop tensile strength test
-
45-degree Pull Test of Solder Joints on QFP Lead (complies with the corresponding part of JIS Z3198-6: 2003)
-
Cable Crimp Terminals Tension Strength Test(Complies with the corresponding part of IEC 60512-16-4: 2008 and JIS C2805: 2010)
-
Clip Retension Test (Simple Manual Test)
-
Elasticity test of face mask band
-
Fabric bag handle tension test
-
High-Voltage Wire Harness Crimp Terminal Tension Strength Test(Complies with the corresponding part of JIS C2805:2010)
-
Needle bonding strength test
-
Opening operability test of helmet shield
-
Peel Test of Gable-Top Package (Manual)
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
Pull off test of elastic band from face mask
-
Pull Strength Test of Gull-wing Lead (complies with the corresponding part of IEC62137-1-1: 2007)
-
Sewed decoration tension strength test
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mount Solder Joint (complies with the corresponding part of IEC62137-1-2:2007)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Simple Corrugated Cardboard Sealing Strength Test
-
Spot welding bonding strength test
-
Spray Bottle Cap Insertion-Extraction Test
-
Tensile Strength Test of Crimped Wire Terminals (Break Test) (Complies with the corresponding part of IEC 60512-16-4: 2008)
-
Tensile Strength Test of Crimped Wire Terminals (Durability Test) (Complies with the corresponding part of JIS C2805: 2010)
-
Tension strength and elongation test of thread
-
Tension strength test of hand wipes (non-woven)
-
Tension Strength Test of Polypropylene Strapping Band
-
USB connector extraction/insertion test
-
Complete Peeling Test of Instant Cup Noodle Lid
-
Film Case Cap Pull Off Test
-
Flip Cap Opening Test
-
Glue Cap Pull Off Test (Simple Manual Test)
-
Opening torque test of large bottle
-
Packaging film opening (tearing) strength test
-
Peel Strength Test of Heat-Sealed Packages
-
Peel test of jelly container lid (manual test)
-
Peel Test of Packaged Cooked Rice Lid
-
Screw Cap Torque Test of Bottles
-
Spout Pouch Cap Opening Torque Test
-
Stay-On-Tab Package (Beverage Can) Opening Test Complies with the corresponding part of ISO 17480: 2015
-
Unsealing test of jelly container lid
-
Shoe sole hardness test