Particular Samples Measurements

Enables peel test of crimped postcard.

This custom-made attachment is designed to fix wide and thin materials such as blade directly to the force gauge. We also offer laser printing services to the attachment for easy confirmation of the length.

IMADA offers custom-made attachment for wine cork extraction test. The fixing height is adjustable according to the wine bottle size. We offer high cost-performance manual type and high repeatability motorized type to fit your needs.

Designed to measure the compression value to bend corrugated cardboard to 90 degree at its score. The attachment forms are compliant to Tappi T829.

Measure the force to open flat pack cartons by a carton former. If you have a test stand and a force gauge, you can conduct several kinds of measurement on corrugated cardboard only by changing attachment.

Set of attachments to measure break strength of lipsticks or lip balms, consisting of a fixture for versatile vertical stands to equip with the stick holder of FRTS, our texture analyzer, and an upper jig with a suitable form to compress stick-form samples.

Motorized dual-column testers for big samples such as corrugated cardboard boxes. The machine can keep pressing the test sample for up to 999 hours and 59 mins with a maximum force of 5000N. A manual dual-column tester is also available.

IMADA offers custom-made products and services. The film grip with openable gripping part is designed for extremely thin and soft sample. The openable gripping part makes it easy to set a specimen and clean it.

IMADA offers custom-made products and services. This pantograph grip with pressurization mechanism is designed to grip slippery sample such as metal plate. The gripping force increases up to about 30 times by using the pressurized screws. It is also ideal for testing in a narrow space.

This custom-made fixture is designed for motorcycle accelerator torque test. It is used to fix to the hand grip and rotate the torque sensor to test.

This is peel test fixture for solar cell ribbon. The fixed or adjustable peeling angle types are selectable to meet your testing requirements.

The customized motorized stand with a large table is ideal for testing large samples. The height and position can be easily adjusted with bolts according to the sample. The quick-tightening nut improves work efficiency.

This is compression test attachment specialized for LCD panel. Its urethane material of contact area reduces the risk of damaging sample. The size is changeable to meet your testing requirements.

This customized fixture is designed for tension test of L-shaped sample such as busbar. It can fix 2 different types of samples by its 2 fixing plates. Moreover, it is designed exclusively for the specific samples which enables needless of position adjustment, enhancing the measurement efficiency.

This customized attachment is for opening/closing force test of takeout container lid. It is designed to handle various sizes of containers. In addition, it enables you to fix the sample easily and quickly, saving preparation time. For closing force test, to simulate the actual feeling when compressing the lid by hand, the number and position of the compression pins are adjustable.

This customized attachment is designed for squeezing force test of eye drop bottles. It simulates the feel of squeezing the bottle by using 2pcs of urethane parts, which have similar hardness of human fingers, to push the bottle from 2 sides.

This attachment is customized from standard PR series to test durability of the squeeze tube. The compression plate is designed to press part of squeeze tube, so there is no need to remove its cap during the test. To reduce the risk of rusting, the compression part is made of resin.

This customized attachment is designed for tension test of welded nut on iron plate. A screw is used to go through the customized adapter and tigthen to the weld nut. The strength of the welded part is measured by pulling the customized adapter. Multiple adapters are available for nuts with different diameter screws. It is also suitable for strength tests of resin parts with embedded nuts and screw hole for thread.

This customized attachment is designed for tension strength test of tube such as artificial blood vessel. The tube is pulled from the side by 2pcs shafts, which are inserted into the tube. The "U" shaped shaft (upper side) can approach the lower shaft closely, which enables test of small diameter tube.

This customized attachment is designed for tension test of short or fragile samples which are hard to grip by chuck. Tension strength is measured by pulling the separated left and right plates, where both ends of the sample are fixed by adhesive. It is also suitable for a thin rod-shaped sample, by using the groove in the center of the plates.

This customized attachment is designed for compression test of nasal spray. To simulate the actual use of nasal spray, its left and right bars are used to fix the nasal spray and press down the nozzle. It is suitable for various size samples thanks to the adjustable distance between the bars.

This is an Individually Adjustable Torque Chuck Attachment. Since the sample position can be adjusted freely, torque can be measured even if the cap whose opening torque is to be measured or the rotary switch whose operability is to be evaluated are not in the center of the sample. Realizes precision measurement with aligning the rotation axis of the cap and switch with the center of the sensor.

This is a resistance force measurement jig for hair combing test. A hair sample is gripped by the chuck jig installed on the force gauge and moved through a comb fixed to the clamp jig on the test stand to measure the combing resistance of the hair sample.

This is an attachment for Lateral Compression Test of cup containers such as paper cups and plastic cups. The sample position can be adjusted by moving the bracket. Possible to measure the compression at various points on the side of the cup container.

This is a water-proof shield for motorized torque test stand. The bottom part that connects with the torque meter is designed as a tray, allowing drainage from its side. This shield is used when measuring the opening torque of a bottle cap or cork containing liquid such as liquors, this shield protects the torque meter and test stand from liquid spilled when the container breaks. It can also be equipped with an interlock function.

Ideal for force measurement and analysis of pulling the sample biaxially (in two directions)