IMADA's peel tester measures adhesive force of adhesive tape. Adhesive force is determined by the average force required to peel tape, thus, you need to peel tape at constant speed. (If the peeling speed fluctuate, the average value was badly affected and the result was not accurate.) In the video, IMADA's peel tester peels adhesive tape at 180 degree. The tester peels tape at constant speed, and calculate the average automatically, in other words, you can perform peel test more accurately and more easily. Besides, it enables testing complying with the corresponding part of ISO and JIS standards.
Standards
- ISO 29862 (2007) [Self adhesive tapes-Determination of peel adhesion properties] (corresponding part only)
- JIS Z0237 (2009) [Self adhesive tapes-Determination of peel adhesion properties] (corresponding part only)
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
| Examples of Product Configuration |
|---|
High Speed Peeling Tester IPTS-20N/50N |
Related Applications
-
Adhesive tape peel strength test (Force-Displacement)
-
Automatic Torque Test for PET Bottle Cap
-
Breaking strength test of embossed carrier tape
-
Cable ties loop tensile strength test
-
Complete Peeling Test of Instant Cup Noodle Lid
-
Crimped Postcard Peel Strength Test
-
Dressing Bottle’s Cap and Inner Plug Opening Force Test
-
Earthquake-Proof Mat Tack Test
-
Film Case Cap Pull Off Test
-
Flip Cap Opening Test
-
Glue Cap Pull Off Test (Simple Manual Test)
-
Heat Seal Pull Off Test (Simple Manual Test)
-
Heat Seal Strength Test of Plastic Bags
-
Opening operability test of helmet shield
-
Opening torque test of large bottle
-
Packaging film puncture strength test
-
Packaging film tension strength test
-
Peel off test of flexible printed circuit（IEC 249-1: 1982 and IEC 326-2: 1990）
-
Peel Strength Test of Heat-Sealed Packages
-
Peel Test of Gable-Top Package (Manual)
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
Peel test of jelly container lid (manual test)
-
Peel Test of Packaged Cooked Rice Lid
-
Pull-off Test of Coating (Complies with the corresponding part of ISO 4624: 2002)
-
Retort Pouch Durability (Burst Strength) Test (Complies with the corresponding part of JIS Z0238:1998)
-
Screw Cap Torque Test of Bottles
-
Shear Test and Peel Strength Test of Hook and Loop Fastener (Complies with the corresponding part of JIS L3416: 2020)
-
Spout Pouch Cap Opening Torque Test
-
Stay-On-Tab Package (Beverage Can) Opening Test Complies with the corresponding part of ISO 17480: 2015
-
Tension Strength Test of Polypropylene Strapping Band
-
Test Method for Seal Strength of Flexible Barrier Materials (Complied with the corresponding part of ASTM F88/F88M-15: 2015)
-
Unsealing test of jelly container lid
-
Probe tack test of adhesive plaster (bandage)
-
Softness Measurement of Hand Cream
-
Coefficient of Friction Measurement for Papers (Complies with the corresponding part of JIS P8147: 2010)
-
Packaging film coefficient of friction test
-
Tensile Strength Test of Plastic Bag Handle
