Compression [2]

Testing applications of sticking, inserting, bending, and folding force are introduced in Compression [2].
[Stick/Insert] introduces testing to evaluate penetrating force of needle and inserting force of connector including USB and plug.
[Bend/Fold] introduces testing to evaluate physical characteristics of samples such as bending force testing of metal plate, paper straw, etc.
Click here to see Compression [1] for other compression testing applications.

Stick/Insert

Packaging film puncture strength test

This is puncture strength test of packaging film for quality control and R&D. It enables testing according to the corresponding part of JIS standard.
Click here
for Details

Puncture Test of Paper Straw

This is puncture test of paper straw. Stick the paper straw into the film lid and test the maximum force. IMADA offers the dedicated testing system such as the following configuration, which is utilized in quality control and R&D.
Click here
for Details

Syringe needle penetration test

Syringe needle is penetrated into something to measure its resistance force for quality control and R&D.
Click here
for Details

Bend/Fold

3-Point Bending Test of Paper Straw

This is 3-point bending test of paper straw to evaluate its bending strength. By using IMADA graphing software, the testing results of different material and diameter, or samples in different soaking time can be compared in one screen. IMADA offers the dedicated testing system such as the following configuration, which is utilized in quality control and R&D.
Click here
for Details

3-Point Bending Strength Test of Fine Ceramics (Complies with the corresponding part of JIS R 1601:2008)

This is 3-point bending strength test of fine ceramics by using IMADA 3-point bending fixture complying with the corresponding part of JIS R 1601:2008. It is for safety evaluation and quality control.
Click here
for Details

3-Point bending test of round bar shaped sample

This is 3-Point bending test of round bar shaped sample which used as material for construction and furniture manufacturing. It is for material safety evaluation and quality control.
Click here
for Details