IMADA's force-displacement tester determines click sensation (feeling) of tactile switches. In the video, the tester presses a switch, measuring the resistance force and graphing the measurement. In other words, to determine the click sensation, you need to measure displacement as well as force. Then, the tester graphs force transition with reference to displacement, helping identify the hysteresis (zero reversion). Thus, the force-displacement tester handles various characteristic evaluation other than click sensation of switches. The remarkable thing is that the tester automatically detects contact point of the sample and presses switches by pre-set displacement, which improves repeatability and test-efficiency.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
| Examples of Product Configuration |
|---|
Force-displacement Measurement Unit FSA series |
Urethane Spherical Compression Jig UR series |
Extension Shaft A-6/S-6 |
Related Applications
-
45-degree Pull Test of Solder Joints on QFP Lead (complies with the corresponding part of JIS Z3198-6: 2003)
-
Audio player’s knob operativity test
-
Automotive air conditioner’s knob operability (torque-angle) test
-
Breaking strength test of embossed carrier tape
-
Embossed career tape peel (adhesion) test
-
Motor torque-angle test
-
Peel off test of flexible printed circuit（IEC 249-1: 1982 and IEC 326-2: 1990）
-
Pull Strength Test of Gull-wing Lead (complies with the corresponding part of IEC62137-1-1: 2007)
-
Rotary switch operability test (keep rotation)
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mount Solder Joint (complies with the corresponding part of IEC62137-1-2:2007)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Tactile Test of Mouse Button
-
USB connector extraction/insertion test
-
Wire crimped terminal test
-
3-Point bending test of round bar shaped sample
-
500ml Plastic Bottle Top-load Testing
-
Actuation force test of dispenser
-
Car Hood Closing Test (Simple Manual Test)
-
Compression test of syringe
-
Cookie hardness test (manual)
-
Foot Brakes Pedal Stepping Force Test
-
Jelly penetration test
-
Meat cutting (shear) test
-
Noodle (Pasta) cutting (shear) test
-
Opening operability test of helmet shield
-
Operating Force Test of Motorcycle’s Brake Lever
-
Pasta Tension Strength Test
-
Repulsion Force Test of Cushioning Material
-
Repulsion Force Test of Game Ball
-
Retort Pouch Durability (Burst Strength) Test (Complies with the corresponding part of JIS Z0238:1998)
-
Rice hardness test
-
Safety Evaluation of Power Window’s Anti-Pinch Function (Simple Inspection)
-
Shoe sole hardness test
-
Simple Elasticity Force Test of Ball
-
Simple Repulsion Force Test of Packing Material
-
Spray Bottle Cap Insertion-Extraction Test
-
Tablet Hardness Test (Compression Test)
-
Cart pushing force test
-
Compression test of syringe (Complies with the corresponding part of ISO 7886-1:2017)
-
Push-out Test of Tablet Packaging (Pharmaceutical Blister Pack)
-
Softness Measurement of Hand Cream
-
Spray press button compression test
-
Strength and Sharpness Testing of Acupuncture Needle (Complies with the corresponding part of ISO 17218 : 2014)
-
3-Point Bending Strength Test of Fine Ceramics (Complies with the corresponding part of JIS R 1601:2008)
-
Cable ties loop tensile strength test
