IMADA specializes in
force measurement

PRODUCTS
- Force Gauges Load Cells (Force Sensors) Force Test Stands Torque Testers Torque Test Stands Attachments, Grips &
  Fixtures Software / Download Card Cables 180 Degree Peel Testers Food Texture Analyzer & Related Wire Crimp Pull Testers Other Equipment Custom Made Discontinued Products
SOLUTIONS
- Basic Principle of Force Measurement SOLUTIONS BY FORCE
SOLUTIONS BY INDUSTRY
- Automotive / Transportation Aerospace Electronics / Semiconductors Industry Machinery / Parts Energy Packaging / Containers / Paper Food / Beverages Textile / Apparel Construction / Furniture Cosmetics / FMCG Medical Equipment Pharmaceutical Ergonomics / Sporting Goods Chemicals / Raw Materials Occupational Training Musical Instruments
SERVICE & SUPPORT
- Technical consultation Custom Manufacturing Sample Measurement Laboratory Consignment Test Purchase Support Repair Service Calibration Service Instruction Manual Brochure Request Certificate Samples About Next series (IMADA Connected) Force Unit Conversion (N ⇔ kgf ⇔lbf etc.) Crucial points to select a force-gauge manufacturer Daily Inspection
NEWS
ABOUT IMADA

MENU CLOSE

Product Search

Solution Search

Searchable by product name, product model or standard.
When searching by product model, enter the product model excluding the option code (-FA, -L, -NEXT, etc.).
*To search by solution, switch to “solution search.”

i.e., Load Cells, ZTA-50N, 7864 (for ISO 7864)

Searchable by you force type, industry, standard or product sample.
*To search by product, switch to “product search.”

i.e., Compression, 7864 (for ISO 7864)

FAVORITES

Cables

Cables Overview Analog Cables RS232C Cables Digimatic Cables Test Stand Optional Cables Displacement Cables External Contact Point Cables Open End Cables Terminal Block Cable

CONTACT

Cables

Various cables are available to connect a force gauge to an external equipment, to connect a force gauge or amplifier to IMADA test stand, or to connect IMADA test stand to an external equipment. Use them to make your measurements more convenient and extensively.

Analog Cables

Analog cables connect to pen recorders, sequencers, and other devices with analog input terminals to enable recording of results and changes in measured values

Analog Cable for ZT

CB-118

Analog Output

For ZT-AN option

CB-118 is analog cable used to connect ZT-AN series force gauges with analog devices such as pen recorder, oscilloscope and multi meter.

For more info

Analog Cable for ZT

CB-108

Analog Output

CB-108 is analog cable used to connect ZT series force gauges with analog devices such as pen recorder, oscilloscope and multi meter.

For more info

Analog Cable for ZP/Z2/HTG2/DTX2

CB-104

Analog Output

CB-104 is analog cable used to connect ZP/Z2/HTG2/DTX2 series force gauges/torque gauges with analog devices such as pen recorder, oscilloscope and multi meter.

For more info

Analog Cable for DS2

CB-101

Analog Output

CB-101 is analog cable used to connect DS2 series force gauges with analog devices such as pen recorder, oscilloscope and multi meter.

For more info

RS232C Cables

This cable connects to an external device such as a PC or PLC and enables recording of results and changes in measured values via RS232C communication.

RS232C Cable for ZT

CB-208

RS232C Output

CB-208 is RS232C Cable used to connect ZTS/ZTA series force gauges with PC, enabling data recording and operation from PC.

For more info

RS232C Cable for DST/DSV

CB-203

RS232C Output

CB-203 is RS232C Cable used to connect DST/DSV series force gauges with PC, enabling data recording and operation from PC.

For more info

RS232C Cable for ZP/Z2/HTG2/DTX

CB-204

RS232C Output

CB-204 is RS232C Cable used to connect ZP/Z2/HTG2/DTX2 series force gauges/torque gauges with PC, enabling data recording and operation from PC.

For more info

Digimatic Cables

This cable connects to the Mitutoyo Digimatic Mini Processor to enable recording of measurements.

Digimatic Cable for ZT series (firmware older than Ver.5)

CB-308

Digimatic Output

CB-308 is digimatic cable used to connect ZTS/ZTA series force gauges (firmware older than Ver.5) with Mitutoyo Digimatic printer.

For more info

Digimatic Cable for Z2/HTG2/DTX

CB-304

Digimatic Output

CB-304 is digimatic cable used to connect Z2/DTX2/HTG2 series force gauges/torque gauges with Mitutoyo Digimatic printer.

For more info

Digimatic Cable for DS2

CB-301

Digimatic Output

CB-301 is digimatic cable used to connect DS2 series force gauges with Mitutoyo Digimatic printer.

For more info

Test Stand Optional Cables

This cable connects the test stand to the equipment and enables operation control by force value and activation of the overload stop function.

Force Control Cable (MX2/EMX - ZT connection)

CB-528

Force Control

Overload Prevention

CB-528 is a cable used to connect a motorized test stand, MX2/EMX series, with a digital force gauge or an amplifire to activate functions of the test stand. It is also used to connect a motorized torque stand, MTS series, with a screw cap torque tester, DTXS/DTXA series.

For more info

Force Control Cable (MX-ZT connection)

CB-508

Force Control

Overload Prevention

CB-508 is cable used to connect MX series test stand with ZTS/ZTA series digital force gauges to activate functions of test stand such as overload prevention and force control.

For more info

Force Control Cable (MX-ZP/Z2 connection)

CB-504

Force Control

Overload Prevention

CB-504 is cable used to connect MX2/EMX series test stand with ZP/Z2 series digital force gauges to activate functions of test stand such as overload prevention and force control as well as to enable communication with PC via RS232C.

For more info

Force Control Cable (MX2/EMX-ZP/Z2 connection)

CB-704

Force Control

Overload Prevention

CB-704 is cable used to connect MX2/EMX series test stand with ZP/Z2 series digital force gauges to activate functions of test stand such as overload prevention and force control.

For more info

Force Control Cable (MX-ZP/Z2 connection)

CB-501

Force Control

Overload Prevention

CB-501 is cable used to connect MX series test stand with ZP/Z2 series digital force gauges to activate functions of test stand such as overload prevention and force control.

For more info

External Signals I/O Cable (MX2-CN/EMX)

CB-706

Ext. Signal I/O

CB-706 is external signals I/O cable used to connect MX2-CN or EMX series test stand with external equipment to activate external control of the test stands.

For more info

External Signals I/O Cable (MX3-CN)

CB-716

Ext. Signal I/O

Cable CB-716 connects an external device to the motorized test stand MX3 series (-CN option), allowing signal outputs and inputs.

For more info

Displacement Cables

This cable is required to connect a test stand to a measuring equipment to obtain force-displacement or torque-angle.

Displacement Cable (MX2-FA/MH2-FA/EMX-FA with firmware version 2.0 or later - ZT connection)

CB-718

Force Control

Overload Prevention

Displacement Output

CB-718 is a cable used to connect a motorized test stand of MX2-FA/MH2-FA/EMX-FA series with firmware earlier version than 2.0 with a digital force gauge or an amplifier with displacement output function. It enables force-displacement measurement and activate functions of the test stand.

For more info

Displacement Cable (EMX-FA with firmware earlier version than 2.0 - ZT connection)

CB-728

Force Control

Overload Prevention

Displacement Output

CB-728 is a cable used to connect a motorized test stand, EMX-FA series with firmware earlier version than 2.0, with a digital force gauge or an amplifier with displacement output function. It enables force-displacement measurement and activate functions of the test stand. It is also used to connect a motorized torque test stand, MTS-10N-RA series, with a screw cap torque tester DTXA series.

For more info