This is 3-point bending strength test of fine ceramics by using IMADA 3-point bending fixture complying with the corresponding part of JIS R 1601:2008. It is for safety evaluation and quality control.
Standards
- JIS R1601 (2008) [Testing method for flexural strength of fine ceramics at room temperature] (corresponding part only)
- High capacity ZTS series and MX2-5000N are recomended for this test.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
| Examples of Product Configuration |
|---|
High Capacity Model Digital Force Gauge ZTS series (High Capacity) |
Standard Type Vertical Motorized Test Stand MX2 series |
3-Point Bending Test Fixture BT-500N/5000N/5000N-CB |
Force Control Cable (MX2/EMX - ZT connection) CB-528 |
Related Applications
-
3-Point Bending Test of Paper Straw
-
3-Point bending test of round bar shaped sample
-
Cable ties loop tensile strength test
-
Motor torque-angle test
-
Peel off test of flexible printed circuit（IEC 249-1: 1982 and IEC 326-2: 1990）
-
Rotary switch operability test (keep rotation)
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mount Solder Joint (complies with the corresponding part of IEC62137-1-2:2007)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Tactile switch click sensation test
