Adhesive tape is pulled to measure its peel strength for quality control and R&D. It enables testing according to the correspondling part of JIS standard.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right prodcut model for the product configuration. Refer to the specification of each product for the compatibility.
| Examples of Product Configuration |
|---|
Force-displacement Measurement Unit FSA series |
90 degree Peel Test Fixture P90-200N |
Film Grip FC-21/20/40/21U/41U/21UQ |
Related Applications
-
180-Degree peel test (adhesion test) of adhesive sheet by using peeling tester
-
Buffer material hardness test
-
Cable ties loop tensile strength test
-
Corrugated cardboard durability test
-
Heat seal strength test
-
Packaging film coefficient of friction test
-
Packaging film opening (tearing) strength test
-
Packaging film puncture strength test
-
Packaging film tension strength test
-
Retort pouch durability (burst strength) test
-
Tension Strength Test of Polypropylene Strapping Band
-
Embossed career tape peel (adhesion) test
-
Hook and loop fastener pull strength test
-
Peel test of jelly container lid (manual test)
-
unsealing test of jelly container lid
-
Breaking strength test of embossed carrier tape
-
Pharmaceutical packaging push out test
