Polypropylene Strapping Band is pulled to measure its tension strength for quality control. It enables testing according to the corresponding part of JIS standard.
Standards
- JIS Z1527 (2002) [Polypropylene Band] (corresponding part only)
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
| Examples of Product Configuration |
|---|
Force-displacement Measurement Unit FSA series |
Attachment for Polypropylene (PP) Strapping Band Tension Test PPC-5000N |
Related Applications
-
Adhesive tape peel strength test (Force-Displacement)
-
Cable ties loop tensile strength test
-
Heat seal strength test
-
Packaging film coefficient of friction test
-
Packaging film opening (tearing) strength test
-
Packaging film puncture strength test
-
Packaging film tension strength test
-
Repulsion Force Test of Cushioning Material
-
Simple Repulsion Force Test of Packing Material
-
180-Degree peel test (adhesion test) of adhesive sheet by using peeling tester
-
45-degree Pull Test of Solder Joints on QFP Lead (complies with the corresponding part of JIS Z3198-6: 2003)
-
Breaking strength test of embossed carrier tape
-
Cable Crimp Terminals Tension Strength Test(Complies with the corresponding part of IEC 60512-16-4: 2008 and JIS C2805: 2010)
-
Clip Retension Test (Simple Manual Test)
-
Elasticity test of face mask band
-
Fabric bag handle tension test
-
Heat Seal Pull Off Test (Simple Manual Test)
-
High-Voltage Wire Harness Crimp Terminal Tension Strength Test(Complies with the corresponding part of JIS C2805:2010)
-
Meat cutting (shear) test
-
Needle bonding strength test
-
Opening operability test of helmet shield
-
Opening torque test of large bottle
-
Pasta Tension Strength Test
-
Peel Test of Gable-Top Package (Manual)
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
Peel test of jelly container lid (manual test)
-
Pull off test of elastic band from face mask
-
Pull Strength Test of Gull-wing Lead (complies with the corresponding part of IEC62137-1-1: 2007)
-
Retort Pouch Durability (Burst Strength) Test (Complies with the corresponding part of JIS Z0238:1998)
-
Sewed decoration tension strength test
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mount Solder Joint (complies with the corresponding part of IEC62137-1-2:2007)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Simple Corrugated Cardboard Sealing Strength Test
-
Spot welding bonding strength test
-
Spray Bottle Cap Insertion-Extraction Test
-
Tensile Strength Test of Crimped Wire Terminals (Break Test) (Complies with the corresponding part of IEC 60512-16-4: 2008)
-
Tensile Strength Test of Crimped Wire Terminals (Durability Test) (Complies with the corresponding part of JIS C2805: 2010)
-
Tensile Strength Test of Plastic Bag Handle
-
Tension strength and elongation test of thread
-
Tension strength test of hand wipes (non-woven)
-
Unsealing test of jelly container lid
-
USB connector extraction/insertion test
-
Zipper running smoothness test
-
Corrugated cardboard durability test
