Embossed carrier tape’s covering film is pulled to measure its breaking strength for quality control. It enables testing according to the corresponding part of IEC and JIS standard.
Standards
- IEC 60286-3 (2013) [Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes] (corresponding part only)
- JIS C 0806-3 (2014) [Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes] (corresponding part only)
- ZTS series force gauge is recommended in this test.
- 2 pcs of GC-60/100 are necessary to perform this test.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
Examples of Product Configuration |
---|
Standard Model Digital Force Gauge ZTS series |
Standard Type Vertical Motorized Test Stand MX2 series |
Roller Grip GC-60/100 |
Force Control Cable (MX2/EMX - ZT connection) CB-528 |
Related Applications
-
Embossed career tape peel (adhesion) test
-
45-degree Pull Test of Solder Joints on QFP Lead (complies with the corresponding part of JIS Z3198-6: 2003)
-
Cable ties loop tensile strength test
-
Motor torque-angle test
-
Packaging film coefficient of friction test
-
Packaging film puncture strength test
-
Packaging film tension strength test
-
Peel off test of flexible printed circuit(IEC 249-1: 1982 and IEC 326-2: 1990)
-
Pull Strength Test of Gull-wing Lead (complies with the corresponding part of IEC62137-1-1: 2007)
-
Retort Pouch Durability (Burst Strength) Test (Complies with the corresponding part of JIS Z0238:1998)
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mount Solder Joint (complies with the corresponding part of IEC62137-1-2:2007)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Simple Corrugated Cardboard Sealing Strength Test
-
Tactile switch feeling test
-
USB connector extraction/insertion test
-
Wire crimped terminal test
-
180-Degree peel test (adhesion test) of adhesive sheet by using peeling tester
-
Buffer material hardness test
-
Complete Peeling Test of Instant Cup Noodle Lid
-
Crimped Postcard Peel Strength Test
-
Heat Seal Strength Test of Plastic Bags
-
Opening torque test of large bottle
-
Peel Strength Test of Heat-Sealed Packages
-
Peel Test of Gable-Top Package (Manual)
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
Peel test of jelly container lid (manual test)
-
Peel Test of Packaged Cooked Rice Lid
-
Shear Test and Peel Strength Test of Hook and Loop Fastener (Complies with the corresponding part of JIS L3416: 2020)
-
Tension strength test of hand wipes (non-woven)
-
Tension Strength Test of Polypropylene Strapping Band
-
Unsealing test of jelly container lid
-
Tensile Strength Test of Crimped Wire Terminals (Break Test) (Complies with the corresponding part of IEC 60512-16-4: 2008)
-
Tensile Strength Test of Plastic Bag Handle
-
Tension strength and elongation test of thread
-
Adhesive tape peel strength test (Force-Displacement)
-
Coefficient of Friction Measurement for Papers (Complies with the corresponding part of JIS P8147: 2010)