Rotate the specialized attachment to measure rotary motor's torque and analyze torque-angle by the software for performance evaluation, quality control and R&D.
- SDT series is recommended for this test.
- Some samples may not be suitable to measure with this configuration depending on their materials or shapes. Please contact us for technical advice before purchase.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
Examples of Product Configuration |
---|
High Functionality Type Screw Cap Torque Tester (Torque Gauge) DTXA series |
Rotating Supporting Stand Jig SDT series |
Small Table HT-ST series |
Force-Time (Torque-Time) Graphing Software Force Recorder Professional |
Related Applications
-
45-degree Pull Test of Solder Joints on QFP Lead (complies with the corresponding part of JIS Z3198-6: 2003)
-
Breaking strength test of embossed carrier tape
-
Embossed career tape peel (adhesion) test
-
Peel off test of flexible printed circuit(IEC 249-1: 1982 and IEC 326-2: 1990)
-
Pull Strength Test of Gull-wing Lead (complies with the corresponding part of IEC62137-1-1: 2007)
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mount Solder Joint (complies with the corresponding part of IEC62137-1-2:2007)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Tactile switch click sensation test
-
USB connector extraction/insertion test
-
Wire crimped terminal test
-
Automotive air conditioner’s knob operability (torque-angle) test
-
Door Key Torque (turning force) Test
-
Screw Cap Torque Test of Bottles
-
Spout Pouch Cap Opening Torque Test
-
Torque Measurement of Motorcycle Accelerator
-
Torque Test of Lipstick and Lip Balm Containers
-
Audio player’s knob operativity test
-
Opening torque test of large bottle
-
Rotary switch operability test (keep rotation)
-
Screw tightening/loosening torque test
-
3-Point Bending Strength Test of Fine Ceramics (Complies with the corresponding part of JIS R 1601:2008)
-
Cable ties loop tensile strength test