This is simple manual pull off test of a glue cap. With a digital force gauge and double arm hook, the glue cap is hooked and pulled to measure the maximum force required to remove the cap. Bottle inner plugs, pen caps, and similar over caps can be tested likewise for evaluation and quality control.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
| Examples of Product Configuration |
|---|
Digital Force Gauge for Handheld DST series |
Double Arm Hook SHF series |
Related Applications
-
Complete Peeling Test of Instant Cup Noodle Lid
-
Dressing Bottle’s Cap and Inner Plug Opening Force Test
-
Film Case Cap Pull Off Test
-
Flip Cap Opening Test
-
Pull Off Test of Medical Collection Kit Cap
-
Screw Cap Torque Test of Bottles
-
Spray Bottle Cap Insertion-Extraction Test
-
180-Degree peel test (adhesion test) of adhesive sheet by using peeling tester
-
Automatic Torque Test for PET Bottle Cap
-
Heat Seal Pull Off Test (Simple Manual Test)
-
Lateral Box (Bottom Stop) Strength Test of Slide Fasteners (Complies with the corresponding part of JIS S 3015: 2019)
-
Opening operability test of helmet shield
-
Opening torque test of large bottle
-
Peel Strength Test of Heat-Sealed Packages
-
Peel Test of Gable-Top Package (Manual)
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
Peel test of jelly container lid (manual test)
-
Pull-off Test of Coating (Complies with the corresponding part of ISO 4624: 2002)
-
Spout Pouch Cap Opening Torque Test
-
Stay-On-Tab Package (Beverage Can) Opening Test Complies with the corresponding part of ISO 17480: 2015
-
Unsealing test of jelly container lid
-
Clip Retension Test (Simple Manual Test)
-
Needle bonding strength test
-
Packaging film opening (tearing) strength test
-
Peel Test of Packaged Cooked Rice Lid
-
The bonding strength test between the needle tube and the needle hub（Complies with the corresponding part of ISO 7864: 2016）
-
USB connector extraction/insertion test
-
Zipper running smoothness test
-
Packaging film puncture strength test
-
Spray press button compression test
