This is shear strength test of surface mount solder joint complying with the corresponding part of IEC62137-1-2:2007. This method is used to test the endurance of solder joints for evaluation and quality control.
Standards
- IEC 62137-1-2 (2007) [Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test] (Corresponding part only)
- The speed option is required to add to the MX2 series test stand.
- Select the attachment according to the sample size.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
Examples of Product Configuration |
---|
Standard Model Digital Force Gauge ZTS series |
Standard Type Vertical Motorized Test Stand MX2 series |
QFP Lead Hook/Chip Shear Jig SJ series |
SJS-100N-L/S SJS-100N-L/S |
Force-Time (Torque-Time) Graphing Software Force Recorder Standard |
Force Control Cable (MX2/EMX - ZT connection) CB-528 |
Related Applications
-
45-degree Pull Test of Solder Joints on QFP Lead (complies with the corresponding part of JIS Z3198-6: 2003)
-
Breaking strength test of embossed carrier tape
-
Embossed career tape peel (adhesion) test
-
Motor torque-angle test
-
Peel off test of flexible printed circuit(IEC 249-1: 1982 and IEC 326-2: 1990)
-
Pull Strength Test of Gull-wing Lead (complies with the corresponding part of IEC62137-1-1: 2007)
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Tactile switch click sensation test
-
USB connector extraction/insertion test
-
Wire crimped terminal test
-
Cable Crimp Terminals Tension Strength Test(Complies with the corresponding part of IEC 60512-16-4: 2008 and JIS C2805: 2010)
-
Cable ties loop tensile strength test
-
Clip Retension Test (Simple Manual Test)
-
Elasticity test of face mask band
-
Fabric bag handle tension test
-
High-Voltage Wire Harness Crimp Terminal Tension Strength Test(Complies with the corresponding part of JIS C2805:2010)
-
Needle bonding strength test
-
Opening operability test of helmet shield
-
Peel Test of Gable-Top Package (Manual)
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
Pull off test of elastic band from face mask
-
Sewed decoration tension strength test
-
Shear Test and Peel Strength Test of Hook and Loop Fastener (Complies with the corresponding part of JIS L3416: 2020)
-
Simple Corrugated Cardboard Sealing Strength Test
-
Spot welding bonding strength test
-
Spray Bottle Cap Insertion-Extraction Test
-
Tensile Strength Test of Crimped Wire Terminals (Break Test) (Complies with the corresponding part of IEC 60512-16-4: 2008)
-
Tensile Strength Test of Crimped Wire Terminals (Durability Test) (Complies with the corresponding part of JIS C2805: 2010)
-
Tension strength and elongation test of thread
-
Tension strength test of hand wipes (non-woven)
-
Tension Strength Test of Polypropylene Strapping Band
-
Zipper running smoothness test
-
3-Point Bending Strength Test of Fine Ceramics (Complies with the corresponding part of JIS R 1601:2008)
-
Rotary switch operability test (keep rotation)