To determine the tensile strength of plastic bag handle, grip a plastic bag handle with dedicated grips, and pull it to break with a force gauge. IMADA offers the dedicated testing system such as the following configuration, which is utilized in quality control and R&D.
- ZTS series is recomended for this test.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
| Examples of Product Configuration |
|---|
Standard Model Digital Force Gauge ZTS series |
Standard Type Vertical Motorized Test Stand MX2 series |
Large Hook S-7 |
Film Grip FC-21/20/40/21U/41U/21UQ |
Force Control Cable (MX2/EMX - ZT connection) CB-528 |
Related Applications
-
Compression test of syringe
-
Compression test of syringe (Complies with the corresponding part of ISO 7886-1:2017)
-
Fabric bag handle tension test
-
Heat seal strength test
-
Heat Seal Strength Test of Plastic Bags
-
Packaging film coefficient of friction test
-
Packaging film puncture strength test
-
Packaging film tension strength test
-
Cable Crimp Terminals Tension Strength Test(Complies with the corresponding part of IEC 60512-16-4: 2008 and JIS C2805: 2010)
-
Clip Retension Test (Simple Manual Test)
-
Elasticity test of face mask band
-
High-Voltage Wire Harness Crimp Terminal Tension Strength Test(Complies with the corresponding part of JIS C2805:2010)
-
Meat cutting (shear) test
-
Pasta Tension Strength Test
-
Pull off test of elastic band from face mask
-
Simple Corrugated Cardboard Sealing Strength Test
-
Tensile Strength Test of Crimped Wire Terminals (Break Test) (Complies with the corresponding part of IEC 60512-16-4: 2008)
-
Tensile Strength Test of Crimped Wire Terminals (Durability Test) (Complies with the corresponding part of JIS C2805: 2010)
-
Tension strength and elongation test of thread
-
Tension strength test of hand wipes (non-woven)
-
Tension Strength Test of Polypropylene Strapping Band
-
Breaking strength test of embossed carrier tape
-
Cable ties loop tensile strength test
-
180-Degree peel test (adhesion test) of adhesive sheet by using peeling tester
-
Adhesive tape peel strength test (Force-Displacement)
-
Coefficient of Friction Measurement for Papers (Complies with the corresponding part of JIS P8147: 2010)
-
Crimped Postcard Peel Strength Test
