Flexible printed circuit is pulled to measure its peel strength for quality control and R&D. It complies with the corresponding part of IEC 249-1: 1982 and IEC 326-2: 1990.
Standards
- IEC 249-1 (1982) [Base Materials for printed circuits Part1: Test Method](corresponding part only)
- IEC 326-2: 1990 [Printed boards Part2: Test Method] (corresponding part only)
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
Examples of Product Configuration |
---|
Standard Model Digital Force Gauge ZTS series |
Standard Type Vertical Motorized Test Stand MX2 series |
Film Grip FC-21/20/40/21U/41U/21UQ |
90 degree Peel Test Fixture P90-200N |
Force Control Cable (MX2/EMX - ZT connection) CB-528 |
Force-Time (Torque-Time) Graphing Software Force Recorder Standard |
Related Applications
-
45-degree Pull Test of Solder Joints on QFP Lead (complies with the corresponding part of JIS Z3198-6: 2003)
-
Breaking strength test of embossed carrier tape
-
Embossed career tape peel (adhesion) test
-
Motor torque-angle test
-
Pull Strength Test of Gull-wing Lead (complies with the corresponding part of IEC62137-1-1: 2007)
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mount Solder Joint (complies with the corresponding part of IEC62137-1-2:2007)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Tactile switch click sensation test
-
USB connector extraction/insertion test
-
Wire crimped terminal test
-
180-Degree peel test (adhesion test) of adhesive sheet by using peeling tester
-
Complete Peeling Test of Instant Cup Noodle Lid
-
Crimped Postcard Peel Strength Test
-
Earthquake-Proof Mat Tack Test
-
Heat Seal Pull Off Test (Simple Manual Test)
-
Heat Seal Strength Test of Plastic Bags
-
Peel Strength Test of Heat-Sealed Packages
-
Peel Test of Gable-Top Package (Manual)
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
Peel test of jelly container lid (manual test)
-
Peel Test of Packaged Cooked Rice Lid
-
Pull-off Test of Coating (Complies with the corresponding part of ISO 4624: 2002)
-
Shear Test and Peel Strength Test of Hook and Loop Fastener (Complies with the corresponding part of JIS L3416: 2020)
-
Unsealing test of jelly container lid
-
Adhesive tape peel strength test (Force-Displacement)
-
Heat seal strength test
-
3-Point Bending Strength Test of Fine Ceramics (Complies with the corresponding part of JIS R 1601:2008)
-
Cable ties loop tensile strength test
-
Rotary switch operability test (keep rotation)