Lid (cap) of cosmetic container is extracted/inserted repetitively to measure the durability for quality control and R&D.
- ZTS series is recommended for this test.
- Some samples may not be suitable to measure with this configuration depending on their materials or shapes. Please contact us for technical advice before purchase.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
Examples of Product Configuration |
---|
Standard Model Digital Force Gauge ZTS series |
Standard Type Vertical Motorized Test Stand MX2 series |
Cap Clamping Jig CCJ series |
Vise Grip GT-30/2000N |
Force Control Cable (MX2/EMX - ZT connection) CB-528 |
Force-Time (Torque-Time) Graphing Software Force Recorder Standard |
Related Applications
-
Complete Peeling Test of Instant Cup Noodle Lid
-
Film Case Cap Pull Off Test
-
Flip Cap Opening Test
-
Glue Cap Pull Off Test (Simple Manual Test)
-
Heat Seal Pull Off Test (Simple Manual Test)
-
Peel test of jelly container lid (manual test)
-
Pull Off Test of Medical Collection Kit Cap
-
Screw Cap Torque Test of Bottles
-
Unsealing test of jelly container lid
-
3-Point bending test of round bar shaped sample
-
45-degree Pull Test of Solder Joints on QFP Lead (complies with the corresponding part of JIS Z3198-6: 2003)
-
500ml Plastic Bottle Top-load Testing
-
Actuation force test of dispenser
-
Cable Crimp Terminals Tension Strength Test(Complies with the corresponding part of IEC 60512-16-4: 2008 and JIS C2805: 2010)
-
Cable ties loop tensile strength test
-
Car Hood Closing Test (Simple Manual Test)
-
Clip Retension Test (Simple Manual Test)
-
Compression test of syringe
-
Cookie hardness test (manual)
-
Elasticity test of face mask band
-
Fabric bag handle tension test
-
Foot Brakes Pedal Stepping Force Test
-
High-Voltage Wire Harness Crimp Terminal Tension Strength Test(Complies with the corresponding part of JIS C2805:2010)
-
Jelly penetration test
-
Meat cutting (shear) test
-
Needle bonding strength test
-
Noodle (Pasta) cutting (shear) test
-
Opening operability test of helmet shield
-
Operating Force Test of Motorcycle’s Brake Lever
-
Pasta Tension Strength Test
-
Peel Test of Gable-Top Package (Manual)
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
Peel Test of Packaged Cooked Rice Lid
-
Pull off test of elastic band from face mask
-
Pull Strength Test of Gull-wing Lead (complies with the corresponding part of IEC62137-1-1: 2007)
-
Repulsion Force Test of Cushioning Material
-
Repulsion Force Test of Game Ball
-
Retort Pouch Durability (Burst Strength) Test (Complies with the corresponding part of JIS Z0238:1998)
-
Rice hardness test
-
Safety Evaluation of Power Window’s Anti-Pinch Function (Simple Inspection)
-
Sewed decoration tension strength test
-
Shear Strength Test of Solder Joints on Chip Components (complies with the corresponding part of JIS Z3198-7: 2003)
-
Shear Strength Test of Surface Mount Solder Joint (complies with the corresponding part of IEC62137-1-2:2007)
-
Shear Strength Test of Surface Mounted Devices (complies with the corresponding part of IEC60068-2-21:2006)
-
Shoe sole hardness test
-
Simple Corrugated Cardboard Sealing Strength Test
-
Simple Elasticity Force Test of Ball
-
Simple Repulsion Force Test of Packing Material
-
Softness Measurement of Hand Cream
-
Spot welding bonding strength test
-
Tablet Hardness Test (Compression Test)
-
Tactile switch click sensation test
-
Tactile Test of Mouse Button
-
Tensile Strength Test of Crimped Wire Terminals (Break Test) (Complies with the corresponding part of IEC 60512-16-4: 2008)
-
Tensile Strength Test of Crimped Wire Terminals (Durability Test) (Complies with the corresponding part of JIS C2805: 2010)
-
Tension strength and elongation test of thread
-
Tension strength test of hand wipes (non-woven)
-
Tension Strength Test of Polypropylene Strapping Band
-
USB connector extraction/insertion test
-
Zipper running smoothness test
-
Automatic Torque Test for PET Bottle Cap
-
Opening torque test of large bottle
-
Packaging film opening (tearing) strength test
-
Peel Strength Test of Heat-Sealed Packages
-
Spout Pouch Cap Opening Torque Test
-
Stay-On-Tab Package (Beverage Can) Opening Test Complies with the corresponding part of ISO 17480: 2015
-
Packaging film puncture strength test
-
Spray press button compression test
-
Torque Test of Lipstick and Lip Balm Containers