This is opening test of stay-on-tab package (beverage can) in conformance with the corresponding part of ISO 17480: 2015. IMADA offers the dedicated testing system such as the following configuration, which is utilized in quality control and R&D.
Standards
- ISO 17480 (2015) [Packaging - Accessible design - Ease of opening] (corresponding part only)
- The speed option is required to add to the MX2 series test stand.
- This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
- The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
- The products used in this video may differ from the example of product configuration.
- Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
Examples of Product Configuration |
---|
Standard Model Digital Force Gauge ZTS series |
Standard Type Vertical Motorized Test Stand MX2 series |
Can Opening Fixture PTD-100N/PTF-100N |
Small Hook A-1/S-1/SR-1 |
Force-Time (Torque-Time) Graphing Software Force Recorder Standard |
Force Control Cable (MX2/EMX - ZT connection) CB-528 |
Related Applications
-
Complete Peeling Test of Instant Cup Noodle Lid
-
Peel Strength Test of Heat-Sealed Packages
-
Peel Test of Gable-Top Package Complies with the corresponding part of ISO 17480: 2015
-
180-Degree peel test (adhesion test) of adhesive sheet by using peeling tester
-
Fabric bag handle tension test
-
Film Case Cap Pull Off Test
-
Flip Cap Opening Test
-
Glue Cap Pull Off Test (Simple Manual Test)
-
Heat Seal Strength Test of Plastic Bags
-
Opening operability test of helmet shield
-
Opening torque test of large bottle
-
Peel Test of Gable-Top Package (Manual)
-
Peel test of jelly container lid (manual test)
-
Pull Off Test of Medical Collection Kit Cap
-
Screw Cap Torque Test of Bottles
-
Simple Corrugated Cardboard Sealing Strength Test
-
Spout Pouch Cap Opening Torque Test
-
Tensile Strength Test of Crimped Wire Terminals (Break Test) (Complies with the corresponding part of IEC 60512-16-4: 2008)
-
Tensile Strength Test of Crimped Wire Terminals (Durability Test) (Complies with the corresponding part of JIS C2805: 2010)
-
Unsealing test of jelly container lid
-
Packaging film opening (tearing) strength test
-
Peel Test of Packaged Cooked Rice Lid
-
Spray Bottle Cap Insertion-Extraction Test
-
Zipper running smoothness test
-
3-Point Bending Test of Paper Straw
-
500ml Plastic Bottle Top-load Testing
-
Puncture Test of Paper Straw