IMADA specializes in
force measurement

MENU

Product Search

Solution Search

FAVORITES

The bonding strength test between the needle tube and the needle hub(Complies with the corresponding part of ISO 7864: 2016)

  1. Force Measurement IMADA
  2. SOLUTIONS
  3. Medical Equipment
  4. The bonding strength test between the needle tube and the needle hub(Complies with the corresponding part of ISO 7864: 2016)

Description FAVORITES

The bonding strength test between the needle tube and the needle hub(Complies with the corresponding part of ISO 7864: 2016)

Joint Strength

ISO

In this video, the maximum force when pulling out the needle tube from the hub will be measured. This test complies with the corresponding part of ISO 7864: 2016. The non-destructive test that the needle tube keeps being pulled at certain force value can be also implemented with the same test unit. MED-NPT-200N, the attachment used in this video, has three slits with different widths and is available for needles whose diameters are from 0.3mm to 2.0mm. This kind of tests are conducted for quality evaluation, quality management, and R&D.

inquiry number

1N2001A

Present the “inquiry number” below when you contact us, for prompt assistance.

Relevant Industrial Standards

ISO 7864 [ 2016 ] [Sterile hypodermic needles for single use-Requirements and test methods] (corresponding part only)

Related sample

  • Injection needle

Measurement Example Videos

Cautions

This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
The products used in this video may differ from the example of product configuration.
Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.

CONTACT US
Unit
Converter
Unit Converter

Convenient Unit/Torque/
Tension conversion

6 Significant Digits (*Significant digits are meaningful digits that do not include zeros, which are used to indicate the scale.)

Products

CLICK
HERE!
Attachments, Grips & Fixtures Attachments, Grips & Fixtures
Custom Made Custom Made