IMADA specializes in
force measurement

PRODUCTS
- Force Gauges Load Cells (Force Sensors) Force Test Stands Torque Testers Torque Test Stands Attachments, Grips &
  Fixtures Software / Download Card Cables 180 Degree Peel Testers Food Texture Analyzer & Related Wire Crimp Pull Testers Other Equipment Custom Made Discontinued Products
SOLUTIONS
- Basic Principle of Force Measurement SOLUTIONS BY FORCE
SOLUTIONS BY INDUSTRY
- Automotive / Transportation Aerospace Electronics / Semiconductors Industry Machinery / Parts Energy Packaging / Containers / Paper Food / Beverages Textile / Apparel Construction / Furniture Cosmetics / FMCG Medical Equipment Pharmaceutical Ergonomics / Sporting Goods Chemicals / Raw Materials Occupational Training Musical Instruments
SERVICE & SUPPORT
- Technical consultation Custom Manufacturing Sample Measurement Laboratory Consignment Test Purchase Support Repair Service Calibration Service Instruction Manual Brochure Request Certificate Samples About Next series (IMADA Connected) Force Unit Conversion (N ⇔ kgf ⇔lbf etc.) Crucial points to select a force-gauge manufacturer Daily Inspection
NEWS
ABOUT IMADA

MENU CLOSE

Product Search

Solution Search

Searchable by product name, product model or standard.
When searching by product model, enter the product model excluding the option code (-FA, -L, -NEXT, etc.).
*To search by solution, switch to “solution search.”

i.e., Load Cells, ZTA-50N, 7864 (for ISO 7864)

Searchable by you force type, industry, standard or product sample.
*To search by product, switch to “product search.”

i.e., Compression, 7864 (for ISO 7864)

FAVORITES

Penetrability Test for Vial Stoppers (Complies with the corresponding part of ISO 8871-5:2016)

See other industrial videos

Description Measurement Example Videos

CONTACT

Force Measurement IMADA
SOLUTIONS
Medical Equipment
Penetrability Test for Vial Stoppers (Complies with the corresponding part of ISO 8871-5:2016)

Description FAVORITES

Penetrability Test for Vial Stoppers (Complies with the corresponding part of ISO 8871-5:2016)

Puncture Force

ISO

Graph

Medical devices and pharmaceuticals are used for diagnosis, treatment, and prevention of human and animal diseases, which are closely related to human and animal health. Therefore, high level of safety is required and many of these elements are strictly controlled by standards and internal regulations. This video shows how to perform a penetrability test of vial stoppers complying with ISO 8871-5: 2016. IMADA's specialized attachments, jig to fix the vial, Male Lure Slip Adapter to attach a hypodermic needle with 0.8 mm outer diameter (specified in the ISO standard), are used for this test. The peak force required for penetrating the vial stopper (rubber closure) is measured. The optional graphing software shows the entire force transition until the vial stopper (rubber closure) is penetrated, which helps you analyze the suitability of the vial stopper (rubber closure). It is used for the quality evaluation and quality control of vial.

inquiry number

1L2003A

Present the “inquiry number” below when you contact us, for prompt assistance.

Relevant Industrial Standards

ISO 8871-5 [ 2016 ] [Functional requirements and testing] (corresponding part only)

Related sample

Vial stoppers
Elastomeric closure

Measurement Example Videos

Product used

Digital Force gauge

ZTS-20N

Motorized Test Stand

MX2-500N

Optional Attachment

MED-LFA-20N-MS

Optional Attachment

MED-VH-5N

Optional cable

CB-528

Optional software

Force Recorder Standard

Cautions

The lure fitting adapter in this configuration is MED-LFA-20N-MS, male lure slip type. Refer to the specification sheet for other options of the adapters.
When replacing the sample needles, remove the taper connector of the lure fitting adapter first from the force gauge to protect the sensor of the gauge from overloading. In the case the sum of the length of the needle and the height of the vial exceeds 185mm, the test stand is required to have long stroke option.
This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
The products used in this video may differ from the example of product configuration.
Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.